BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Maker Cube Events - ECPv6.15.16//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Maker Cube Events
X-ORIGINAL-URL:https://events.makercube.ca
X-WR-CALDESC:Events for Maker Cube Events
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Vancouver
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260423T180000
DTEND;TZID=America/Vancouver:20260423T220000
DTSTAMP:20260403T144208
CREATED:20260124T222338Z
LAST-MODIFIED:20260216T100119Z
UID:10001014-1776967200-1776981600@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours up to 4 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 10:00pm on weekdays (please note: depending on the participants\, the class may run late) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Find out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-62/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260424T180000
DTEND;TZID=America/Vancouver:20260424T200000
DTSTAMP:20260403T144208
CREATED:20260225T002727Z
LAST-MODIFIED:20260326T203543Z
UID:10001058-1777053600-1777060800@events.makercube.ca
SUMMARY:Router Table Orientation
DESCRIPTION:Learn about Router Table Basics \nThis workshop will teach you the basics of the Router Table. Join us if you’re looking for more experience on woodshop tools! During this workshop you will learn about different bits\, profiling edge\, rabbets\, different tips and tricks for handling material\, and setting up your cut safely. \nDuration: 1.5-2 hours – please arrive on time to participate \n6:00pm – 8:00pm \nClass Capacity: 2-6 \nDifficulty: Beginner \nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou want to know the difference between a groove and dado.\nYou love challenging yourself by learning new skills.\n\nSkills Learned: \n\nDifferent bits and how they are used\nBasics to profiling with the Router Table\nSetting up the Router Table for Rabbets\, Dado\, and Grooves\n\nClass Goals: \nBy the end of the class\, participants will be comfortable to safely run the Router table to use it for a couple of simple setups. You will get hands-on practice time for profiling and dados. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/router-table-orientation-4/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/6eebbe0a0c87b2048d6332e5f03ca0b4-REpB0E.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260425T103000
DTEND;TZID=America/Vancouver:20260425T140000
DTSTAMP:20260403T144208
CREATED:20260324T230139Z
LAST-MODIFIED:20260324T230534Z
UID:10001086-1777113000-1777125600@events.makercube.ca
SUMMARY:Build a Cedar Planter Box—Just in Time for Spring
DESCRIPTION:[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nA seasonal project that makes the perfect Mother’s Day gift\n[/vc_column_text][divider line_type=”No Line” custom_height=”30″][vc_column_text]\nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with a 12 x 12 x 18 inch cedar planter box that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work or create a thoughtful handmade gift for Mother’s Day. During this workshop you will learn how to work with softwood\, assemble panels\, use power tools safely\, and construct a durable outdoor project. \n[/vc_column_text][divider line_type=”No Line” custom_height=”30″][image_with_animation image_url=”26802″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”100%” max_width_mobile=”default”][vc_row_inner column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” top_padding=”30″ text_align=”left” row_position=”default” row_position_tablet=”inherit” row_position_phone=”inherit” overflow=”visible” pointer_events=”all”][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nClass Details\nDuration: 3 hours – please arrive 15 minutes before the start time to participateMaximum # of Participants: 6Project: 12 x 12 x 18″ Cedar Planter BoxDifficulty: BeginnerAge: 14+ \nPlease note registration closes 24 hours prior to class \n[/vc_column_text][/vc_column_inner][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nCome to our workshop if:\nYou’re looking for a different way to unwind after workYou want to be a part of a community of creativesYou love challenging yourself by learning new skillsYou want to build something practical for your home or gardenYou’re looking for a unique\, handmade gift idea for Mother’s Day \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” top_padding=”30″ text_align=”left” row_position=”default” row_position_tablet=”inherit” row_position_phone=”inherit” overflow=”visible” pointer_events=”all”][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nSafety First\nGeneral attire requirements: \nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)Mask (if you have sensitivities to sawdust/airborne dust)Closed-toe shoesLong hair tied backNo loose jewelry or cordsNo long sleeved shirts or loose clothing \n[/vc_column_text][/vc_column_inner][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nSkills Learned:\nYou will learn how to measure and cut lumber\, assemble panels\, use power tools safely\, fasten components using nailers or drills\, and construct a sturdy outdoor planter box. \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text]Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \n[/vc_column_text][/vc_column][/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” top_padding=”40″ text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” gradient_type=”default” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nFAQ\nWhat is the age limit for the class?\nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \n\nWhere can I park?\nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \n\nHow do I cancel or reschedule a class?\nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \n[/vc_column_text][vc_column_text]\nDiscover more to make at Maker Cube here \n[/vc_column_text][/vc_column][/vc_row]
URL:https://events.makercube.ca/event/build-a-cedar-planter-box-just-in-time-for-spring/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/png:https://events.makercube.ca/wp-content/uploads/sites/2/2026/03/PlanterBox-scaled.png
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260426T130000
DTEND;TZID=America/Vancouver:20260426T160000
DTSTAMP:20260403T144208
CREATED:20260303T083226Z
LAST-MODIFIED:20260308T211357Z
UID:10001075-1777208400-1777219200@events.makercube.ca
SUMMARY:Plasma Cutting Orientation
DESCRIPTION:Save time and money with Plasma Cutting! A CNC plasma system is a precision cutting tool for sheet metal up to 3/8″ thick. Join us for an immersive experience where you’ll delve into the essentials of Computer-Aided Manufacturing (CAM) and learn the skills needed to operate the Plasma Cutting CNC effectively. This class is tailored for beginners and anyone interested in the endless possibilities. \nSign up now and unlock the potential to shape your creations with precision and accuracy! \nCome to our workshop if: \n\nYou’re eager to create precise and intricate parts with CNC technology.\nYou are looking for efficient and cost-effective solutions for production.\nYou enjoy customizing projects and exploring diverse design variations.\n\nDetails: \nDuration: 3 hours \nClass Capacity: 2 to 6 participants \nPrerequisites: None \nAge: 14+ \nOptional: 2D Modelling with VCarve Pro or 3D Modelling with Fusion360 for Computer-aided design (CAD)\nPlease note\, we do not cover the process of CAD for creating\, designing\, or modifying files for the CNC in this class. If you are interested in learning about how to create your files\, register online for our vCarve 2D Drafting Class or Fusion 3D Modelling class. \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nHow the Plasma Works\nSafety Guidelines\nFile Setup in Plasma CAM\nTool Setup\nTroubleshooting\n\nEquipment covered: \n\nHypertherm PowerMax\n\nClass Goals: \nBy the end of the class\, participants will be familiar with the CNC process and be authorized to use the CNC independently as a member of Maker Cube at the discretion of the instructor. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/plasma-cutting-orientation-2/
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://events.makercube.ca/wp-content/uploads/sites/2/2020/06/Class-Image-Plasma-CNC.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260428T180000
DTEND;TZID=America/Vancouver:20260428T210000
DTSTAMP:20260403T144208
CREATED:20260224T221849Z
LAST-MODIFIED:20260224T221849Z
UID:10001040-1777399200-1777410000@events.makercube.ca
SUMMARY:Laser Cutting and Engraving
DESCRIPTION:Learn how to customize your projects with the power of laser cutting! Laser cutting is used to add unique designs\, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic\, wood\, plywood\, MDF\, cardboard\, cork\, mylar and more! \nYou’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class\, you will have made your own integrated hinge box using MDF or acrylic! \nCome to our Laser workshop if: \n\nYou’ve always wanted to fire high powered lasers\nYou want to etch intricate designs into your projects\nYou like making finger pistols and going “Pew! Pew! Pew!”\nYou need to precisely cut shapes from sheet materials\n\nDetails: \nDuration: 3 hours \n6:00pm – 9:00pm on weekdays \nMaximum # of Participants: 4 \nProject: MDF or Acrylic laser cut box \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with vector programs like Illustrator or Inkscape is a plus! \n**Please note registration closes 24 hours prior to class** \nSkills learned: \n\nTool Safety procedures and routines\nSetting up your design files\nCreating clean cuts for different applications and materials\nOptimizing your time on the machine\n\nEquipment covered: \n\nLaser Cutter\nLaser support systems\n\nSafety First! \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\n\nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nClick here to learn more about membership at Maker Cube. \nAbout the Instructor: \n\nDoug Chan\, Director and Co-founder at Maker Cube\nDoug is an engineering graduate and serial entrepreneur\, with an aptitude for technology and rapid prototyping. Previously working in several start-ups\, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing\, metal fabrication to PCB fabrication\, he has explored a wide range of processes and techniques. As an enthusiastic learner\, Doug is passionate about passing on the skills he learns\, teaching others to take the leap and trying new things. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/laser-cutting-and-engraving-6/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/bbdaf0cd23a7ebe445699b01a8b1c1f4-XT838P.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260429T180000
DTEND;TZID=America/Vancouver:20260429T213000
DTSTAMP:20260403T144208
CREATED:20260225T001911Z
LAST-MODIFIED:20260225T001911Z
UID:10001055-1777485600-1777498200@events.makercube.ca
SUMMARY:CNC Router Table Orientation: Computer-Aided Manufacturing (CAM)
DESCRIPTION:If you’ve ever wanted to bring your designs to life\, join us for an immersive experience where you’ll delve into the essentials of Computer-Aided Manufacturing (CAM) and learn the skills needed to operate CNC machines effectively. This class is tailored for beginners and anyone interested in the endless possibilities of CNC machining. \nSign up now and unlock the potential to shape your creations with precision and accuracy! \nCome to our workshop if: \n\nYou’re eager to create precise and intricate parts with CNC technology.\nYou are looking for efficient and cost-effective solutions for production.\nYou enjoy customizing projects and exploring diverse design variations.\n\nDetails: \nDuration: 3 hours \nClass Capacity: 2 to 6 participants \nPrerequisites: None \nOptional: 2D Modelling with VCarve Pro or 3D Modelling with Fusion360 for Computer-aided design (CAD)\nPlease note\, we do not cover the process of CAD for creating\, designing\, or modifying files for the CNC in this class. If you are interested in learning about how to create your files\, register online for our VCarve class here. \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nIntroduction to Computer-Aided Manufacturing (CAM) set-up on VCarve Pro\nUnderstanding the basics of CNC machining\nWalkthrough for setting up the X35 CNC machine\n\nEquipment covered: \n\nOnefinity x35 CNC Machine (32″x32″ Bed)\n\nClass Goals: \nBy the end of the class\, participants will be familiar with the CNC process and be authorized to use the CNC independently as a member of Maker Cube at the discretion of the instructor. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/cnc-router-table-orientation-computer-aided-manufacturing-cam-2/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/6f9d4a1360e5ffb0c35d6f32f81dcc56-aCH98k.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260430T160000
DTEND;TZID=America/Vancouver:20260430T183000
DTSTAMP:20260403T144208
CREATED:20260225T003509Z
LAST-MODIFIED:20260302T010213Z
UID:10001059-1777564800-1777573800@events.makercube.ca
SUMMARY:Vinyl Plotting: Making Decals and Stencils
DESCRIPTION:DIY Vinyl Stencil: Customization Made Easy\nVinyl plotting is popular among hobbyists and professionals alike. Learn to create designs\, optimize your file for cutting\, weed to remove excess vinyl and to reveal your design\, and the basics of application for both Adhesive Vinyl and Heat Transfer processes. Use vinyl plotting to make custom stickers\, professional branding\, stencilling\, and home decor. It can also be used to make apparel using heat-transfer vinyl (HTV) to transfer designs onto clothing\, tote-bags\, or other fabrics. \nVinyl plotting is a precise and versatile technique used to cut intricate designs from vinyl sheets. \n**Please note registration closes 24 hours prior to class** \nDuration: 2.5 hours – please arrive early\, the workshop will start promptly \nClass Capacity: 2-4 \nDifficulty: Beginner \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with other vector programs like Illustrator or Inkscape is a plus! \nProject: Pair of etched glassware \nAge: 14+ Minors must be accompanied by a parent or guardian \nClass Goals: \nYou will learn how to create designs\, how to optimize your file for vinyl plotting\, how to weed (remove excess vinyl) to reveal your design\, and how to apply vinyl to flat surfaces. \nNot a member?  If you love the workshop and want more classes or access to our facilities\, check out our monthly memberships. Click here to learn more about membership at Maker Cube. \nGeneral attire: \n\nClosed toed shoes\nLong hair tied back\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/vinyl-plotting-making-decals-and-stencils-3/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2026/03/Glass-Etching-Vinyl-Stencil.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260501T180000
DTEND;TZID=America/Vancouver:20260501T210000
DTSTAMP:20260403T144208
CREATED:20260326T185055Z
LAST-MODIFIED:20260326T195250Z
UID:10001087-1777658400-1777669200@events.makercube.ca
SUMMARY:Build a Cedar Planter Box - Just in Time for Spring
DESCRIPTION:[vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none”][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nA seasonal project that makes the perfect Mother’s Day gift\n[/vc_column_text][divider line_type=”No Line” custom_height=”30″][vc_column_text]\nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with a 12 x 12 x 18 inch cedar planter box that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work or create a thoughtful handmade gift for Mother’s Day. During this workshop you will learn how to work with softwood\, assemble panels\, use power tools safely\, and construct a durable outdoor project. \n[/vc_column_text][divider line_type=”No Line” custom_height=”30″][image_with_animation image_url=”26802″ image_size=”full” animation_type=”entrance” animation=”None” animation_movement_type=”transform_y” hover_animation=”none” alignment=”” border_radius=”none” box_shadow=”none” image_loading=”default” max_width=”100%” max_width_mobile=”default”][vc_row_inner column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” top_padding=”30″ text_align=”left” row_position=”default” row_position_tablet=”inherit” row_position_phone=”inherit” overflow=”visible” pointer_events=”all”][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nClass Details\nDuration: 3 hours – please arrive 15 minutes before the start time to participateMaximum # of Participants: 6Project: 12 x 12 x 18″ Cedar Planter BoxDifficulty: BeginnerAge: 14+ \nPlease note registration closes 24 hours prior to class \n[/vc_column_text][/vc_column_inner][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nCome to our workshop if:\nYou’re looking for a different way to unwind after workYou want to be a part of a community of creativesYou love challenging yourself by learning new skillsYou want to build something practical for your home or gardenYou’re looking for a unique\, handmade gift idea for Mother’s Day \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” top_padding=”30″ text_align=”left” row_position=”default” row_position_tablet=”inherit” row_position_phone=”inherit” overflow=”visible” pointer_events=”all”][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nSafety First\nGeneral attire requirements: \nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)Mask (if you have sensitivities to sawdust/airborne dust)Closed-toe shoesLong hair tied backNo loose jewelry or cordsNo long sleeved shirts or loose clothing \n[/vc_column_text][/vc_column_inner][vc_column_inner column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” overflow=”visible” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/2″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nSkills Learned:\nYou will learn how to measure and cut lumber\, assemble panels\, use power tools safely\, fasten components using nailers or drills\, and construct a sturdy outdoor planter box. \n[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text]Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \n[/vc_column_text][/vc_column][/vc_row][vc_row type=”in_container” full_screen_row_position=”middle” column_margin=”default” column_direction=”default” column_direction_tablet=”default” column_direction_phone=”default” scene_position=”center” top_padding=”40″ text_color=”dark” text_align=”left” row_border_radius=”none” row_border_radius_applies=”bg” overflow=”visible” overlay_strength=”0.3″ gradient_direction=”left_to_right” shape_divider_position=”bottom” bg_image_animation=”none” gradient_type=”default” shape_type=””][vc_column column_padding=”no-extra-padding” column_padding_tablet=”inherit” column_padding_phone=”inherit” column_padding_position=”all” column_element_direction_desktop=”default” column_element_spacing=”default” desktop_text_alignment=”default” tablet_text_alignment=”default” phone_text_alignment=”default” background_color_opacity=”1″ background_hover_color_opacity=”1″ column_backdrop_filter=”none” column_shadow=”none” column_border_radius=”none” column_link_target=”_self” column_position=”default” gradient_direction=”left_to_right” overlay_strength=”0.3″ width=”1/1″ tablet_width_inherit=”default” animation_type=”default” bg_image_animation=”none” border_type=”simple” column_border_width=”none” column_border_style=”solid”][vc_column_text]\nFAQ\nWhat is the age limit for the class?\nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \n\nWhere can I park?\nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \n\nHow do I cancel or reschedule a class?\nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \n[/vc_column_text][vc_column_text]\nDiscover more to make at Maker Cube here \n[/vc_column_text][/vc_column][/vc_row]
URL:https://events.makercube.ca/event/build-a-cedar-planter-box-just-in-time-for-spring-2/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/png:https://events.makercube.ca/wp-content/uploads/sites/2/2026/03/PlanterBox-scaled.png
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260502T103000
DTEND;TZID=America/Vancouver:20260502T140000
DTSTAMP:20260403T144208
CREATED:20260309T004910Z
LAST-MODIFIED:20260309T004910Z
UID:10001079-1777717800-1777730400@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours to 4 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-2/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260503T130000
DTEND;TZID=America/Vancouver:20260503T160000
DTSTAMP:20260403T144208
CREATED:20260226T041551Z
LAST-MODIFIED:20260314T231005Z
UID:10001065-1777813200-1777824000@events.makercube.ca
SUMMARY:MIG Welding Basics
DESCRIPTION:Take home your very own rocket stove in this introductory welding class!\n\n\nIn this introductory level MIG welding orientation\, you can get hands on experience with tools in the metal shop and learn the step by step process to create clean strong welds. You will carry out several operations to prep your material\, tack your pieces and lay a simple bead. This process aims to make you comfortable using the tools and gain welding experience. All of this combined will make your very own rocket stove! \nDuration: 3 hours \nTime: 1:00pm-4:00pm (please note the class may exceed 3 hours and go until 4:30) \nMaximum Participants: four (4) \n**Please note registration closes 24 hours prior to class** \nClass Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld\, tacking a weld\, creating T joints and the outside corners of welds\, and fitting a MIG weld into your project. The final project will be a rocket stove you can proudly take home and use. \nOur instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time. \nAfter the orientation\, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool. \nCome to our workshop if :\nYou want to increase your exposure to welding \nYou are not scared of a few sparks flying (literally) \nYou want to make your own iron man suit \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nSafety First\nRequired: \n\nWelding Mask (We strongly recommended that participants bring their own welding shield\, if a participant does not have a welding mask\, a sanitized welding mask will be provided)\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed Toed Shoes (preferably boots)\nDenim jeans\nLong sleeves\nLong hair tied back\nNo loose jewelry\nNo flammable materials (synthetic material such as polyester\,nylon etc.)\n\nRecommended: \n\nSteel toed boots\nA baseball cap\n\nPrerequisites: None \nTools Learned: \n\nAngle Grinders\nMIG welder\n\nAbout the Instructor : \n\nCorey Gerard – Welding Instructor at Maker Cube\nCorey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy\, precision measures and water jet cutting\, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting\, graphic design and brewing beer! \nIn his space time when he’s not tinkering at Maker Cube\, Corey enjoys; rock climbing in the summer\, snow boarding in the winter\, playing guitar and drinking an ice cold beer. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park ? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nFor more information about membership\, visit http://makercube.ca/how-to-become-a-maker
URL:https://events.makercube.ca/event/mig-welding-basics-3/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/ad4ecbc431519900c66338c9d1a7bf4b-Q2jM9A.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260505T180000
DTEND;TZID=America/Vancouver:20260505T213000
DTSTAMP:20260403T144208
CREATED:20260224T234529Z
LAST-MODIFIED:20260315T003641Z
UID:10001050-1778004000-1778016600@events.makercube.ca
SUMMARY:Rough to Smooth - Advanced Woodworking
DESCRIPTION:Unlock the secrets of milling rough lumber for woodworking projects! Learn to identify wood grain and structure for optimal results and safety. \nFor Beginners: Don’t be intimidated. Our instructors have been in your shoes and will work hard to make sure you have a great experience. \nFor Experienced Makers:  Orientation classes are mandatory for all tool areas but there’s no reason why you can’t have a good time. Let us challenge you with a new technique or help you brush up on the basics. \nProject: Milling down rough lumber \nDifficulty: Intermediate \nPrerequisite: Intro to Wood Working Class You must take the introductory class prior to taking the Advanced class.  Click here to view upcoming Intro to Woodworking classes \nAge: 14+ \nDuration: 3.5 hours – you must arrive 15 minutes before the start time to participate. The class will start as scheduled\, please be respectful to the instructor and other participants by arriving on time. \n**Please note registration closes 24 hours prior to class** \nCome to our Woodworking workshop if:\n\nYou want to enhance your wood working projects\nYou like precision in your craftsmanship\nYou want to have access to more tools\n\nSkills Learned: How to mill rough lumber for use in woodworking projects. Identifying wood\, it’s grain\, and structure to ensure the best and safest results. \nDuring the class\, you will learn and demonstrate competency with each tool. Members will be authorized to use the tools independently as members of Maker Cube at the discretion of the instructor. Please note that based on attendance this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nRequired: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nAbout the Instructor: \n\nAdam Ali\, Director and Co-founder at Maker Cube\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/rough-to-smooth-advanced-woodworking-7/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/42a317b3820f2ac120ff6688859bda52-DOInIY.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260506T180000
DTEND;TZID=America/Vancouver:20260506T210000
DTSTAMP:20260403T144208
CREATED:20260303T081256Z
LAST-MODIFIED:20260303T081256Z
UID:10001068-1778090400-1778101200@events.makercube.ca
SUMMARY:TIG Welding Basics
DESCRIPTION:This intermediate class multi session class at Maker Cube will introduce you to TIG Welding! Tungsten Inert Gas (TIG) welding\, is an arc welding process that produces the weld with a non-consumable tungsten electrode. TIG welding is most suitable for thin sheet material\, high quality\, or precision welding. It’s a more advanced process to learn in comparison to MIG welding\, requiring good hand-eye (and foot) coordination. Join us in our small\, 2-person class and make some rainbows! \nDuration: 3 hours –  Once a week for 3 weeks. \nTime: 6:00pm-9:00pm (please note the class may exceed 3 hours and go until 9:30) \nMaximum Participants: two (2) \n**Please note registration closes 24 hours prior to class** \nClass Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld\, tacking a weld\, creating T joints and the outside corners of welds\, and fitting a MIG weld into your project. The final project will be a rocket stove you can proudly take home and use. \nOur instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time. \nAfter the orientation\, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool. \nCome to our MIG workshop if :\nYou want to increase your exposure to welding \nYou are not scared of a few sparks flying (literally) \nYou want to make your own iron man suit \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nSafety First\nRequired: \n\nWelding Helmet (We strongly recommended that participants bring their own welding shield\, if a participant does not have a welding mask\, a sanitized welding mask will be provided)\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nParticulate Filter (You will be welding metal alloys\, so make sure to bring a particulate mask or respirator. For half mask respirators\, only pancake\, flat-style\, filters will fit under the welding helmet.)\nClosed Toed Shoes (preferably boots)\nDenim jeans\nLong sleeves\nLong hair tied back\nNo loose jewelry\nNo flammable materials (synthetic material such as polyester\,nylon etc.)\n\nRecommended: \n\nSteel toed boots\nA baseball cap\n\nPrerequisites: None \nTools Learned: \n\nTiG welder\n\nAbout the Instructor : \n\nCorey Gerard – MIG and TIG Welding Instructor at Maker Cube\nCorey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy\, precision measures and water jet cutting\, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting\, graphic design and brewing beer! \nIn his space time when he’s not tinkering at Maker Cube\, Corey enjoys; rock climbing in the summer\, snow boarding in the winter\, playing guitar and drinking an ice cold beer. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park ? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nFor more information about membership\, visit http://makercube.ca/how-to-become-a-maker
URL:https://events.makercube.ca/event/tig-welding-basics/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2023/01/PXL_20220313_071511339-scaled.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260506T180000
DTEND;TZID=America/Vancouver:20260506T213000
DTSTAMP:20260403T144208
CREATED:20260224T235935Z
LAST-MODIFIED:20260224T235935Z
UID:10001052-1778090400-1778103000@events.makercube.ca
SUMMARY:Fusion 360 – Design Thinking and 3D Modelling
DESCRIPTION:Enter a realm of infinite design possibilities with 3D modelling. We will walk you through the step by step design process using Fusion 360. \nCome to our workshop if: \nYou want to design your very own unique product \nYou’ve got a doodle on a napkin but want to create a professional representation of your idea \nYou are interested in learning automated fabrication tools like CNC mills \nNot a member? If you love the workshop and want more classes or access to our facilities\, check out our monthly memberships. \nDetails:\nDuration: 3.5 hours \n6:00pm – 9:30pm on weekdays \nMaximum # of Participants: 6 \nProject: Skill building experience with Fusion 360 \nPrerequisites: None. \nParticipants must bring a laptop and mouse to the class with Fusion 360 already downloaded and installed! \nDownload Fusio 360 for personal use here: https://www.autodesk.com/ca-en/products/fusion-360/personal \nRecommended: Basic computer competency (how to use a computer\, browse the internet) \n**Please note registration closes 24 hours prior to class** \nClass Goals:\nParticipants in this class will learn how to think and design in 3D! With the help of our instructor\, participants will be introduced to Fusion 360\, navigating a 3D workspace and utilizing a variety of modelling tools to design a projects for fabrication. Learning the underlying thought process of how a physical shape can be manufactured will be what participants use to drive their design process. By the end of the class\, everyone will have a basic understanding of how to use the software to design a project for fabrication and can use the resulting files in our other classes;laser cutting\, CNC milling\, 3D printing. \nAbout the Instructor:\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favourite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. \nHe followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favourite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nLearn more about Maker Cube and check out our other classes and events at www.makercube.ca \nFAQs\nWhat is the age limit for the class?\nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park?\nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class?\nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees are not refunded. \nPlease arrive 15 minutes before the class to sign-in and to ensure the class starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/fusion-360-design-thinking-and-3d-modelling-2/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/d00259b29dfed58d23435e00cd87199b-RNjjNk.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260507T180000
DTEND;TZID=America/Vancouver:20260507T213000
DTSTAMP:20260403T144208
CREATED:20260309T003430Z
LAST-MODIFIED:20260309T003430Z
UID:10001078-1778176800-1778189400@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:30pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3.5 hours) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Find out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-6/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260508T160000
DTEND;TZID=America/Vancouver:20260508T183000
DTSTAMP:20260403T144208
CREATED:20260225T003717Z
LAST-MODIFIED:20260302T010324Z
UID:10001060-1778256000-1778265000@events.makercube.ca
SUMMARY:Vinyl Plotting: Making Decals and Stencils
DESCRIPTION:DIY Vinyl Stencil: Customization Made Easy\nVinyl plotting is popular among hobbyists and professionals alike. Learn to create designs\, optimize your file for cutting\, weed to remove excess vinyl and to reveal your design\, and the basics of application for both Adhesive Vinyl and Heat Transfer processes. Use vinyl plotting to make custom stickers\, professional branding\, stencilling\, and home decor. It can also be used to make apparel using heat-transfer vinyl (HTV) to transfer designs onto clothing\, tote-bags\, or other fabrics. \nVinyl plotting is a precise and versatile technique used to cut intricate designs from vinyl sheets. \n**Please note registration closes 24 hours prior to class** \nDuration: 2.5 hours – please arrive early\, the workshop will start promptly \nClass Capacity: 2-4 \nDifficulty: Beginner \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with other vector programs like Illustrator or Inkscape is a plus! \nProject: Pair of etched glassware \nAge: 14+ Minors must be accompanied by a parent or guardian \nClass Goals: \nYou will learn how to create designs\, how to optimize your file for vinyl plotting\, how to weed (remove excess vinyl) to reveal your design\, and how to apply vinyl to flat surfaces. \nNot a member?  If you love the workshop and want more classes or access to our facilities\, check out our monthly memberships. Click here to learn more about membership at Maker Cube. \nGeneral attire: \n\nClosed toed shoes\nLong hair tied back\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/vinyl-plotting-making-decals-and-stencils-4/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2026/03/Glass-Etching-Vinyl-Stencil.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260509T130000
DTEND;TZID=America/Vancouver:20260509T170000
DTSTAMP:20260403T144208
CREATED:20260223T015945Z
LAST-MODIFIED:20260227T002902Z
UID:10001032-1778331600-1778346000@events.makercube.ca
SUMMARY:Epoxy Workshop
DESCRIPTION:Join us at Maker Cube to learn about Epoxy in our two-session epoxy workshop! Epoxy is a liquid two-part plastic\, a resin and a hardener\, that can be mixed to create a clear and hard surface once cured. It can be used for projects such as river tables or serving trays\, or used as a high gloss coating for projects. \nAvoid spending unnecessary money and time to practice through trial and error. Whether you are interested in making small pieces like epoxy coasters or want to start on your dream river table\, you need to know how to pick the right epoxy for your project. In this class\, you will get started with the basics and learn how to set up a form to achieve the best results! \nDay 1 – Learn about resins and epoxy and how to select the right product for your project\, how to prepare the wood and to make a leak-proof form. Pick your favourite pigment colour and pour the epoxy. \nDay 2 – Demolding the charcuterie board\, optional shaping\, sanding\, and finishing. For a final touch\, we will use Maker Cube’s Wood Waker Deep Penetrating oil for added lustre and protection. Learn more about this finish at https://woodwaker.ca/ \nProject: 10″x16″ Black Walnut and Epoxy Herringbone Charcuterie Board \nDifficulty: Intermediate \nAge: 14+ \nClass Capacity: 4-6 \nHighly Recommended Class: Introduction to Woodworking \nRecommended Class: Advanced Woodworking \nDuration: 2 session. 4-5 hours each – you must arrive 15 minutes before the start time to participate. The class will start as scheduled\, please be respectful to the instructor and other participants by arriving on time. \nCome to our Epoxy workshop if:\n\nYou want to learn how to pick the right epoxy.\nYou want to get started working with epoxy safely!\nYou want to stop spending money and time on trial and error.\n\nAbout the Instructor: \n\nAdam Ali\, Director and Co-founder at Maker Cube\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/epoxy-workshop-4/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2026/02/epoxyBanner.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260511T180000
DTEND;TZID=America/Vancouver:20260511T200000
DTSTAMP:20260403T144208
CREATED:20260224T231553Z
LAST-MODIFIED:20260328T211834Z
UID:10001048-1778522400-1778529600@events.makercube.ca
SUMMARY:Make Your Own Sushi Platter Set: Handbuilding Pottery for Adults
DESCRIPTION:Come join us in out pottery handbuilding class\, and play with clay to make your Sushi Platter Set! \nPottery is an exceptional art form that transforms clay into functional dinnerware\, home decorations\, and sculptures. In this beginner-friendly class\, you will learn how to handbuild your own pieces using slump molds\, carving\, shaping\, and glazing. You will make your own sushi platter\, sauce dish\, and chopstick rest to take home! \nDuration: 2 hour Classes – Check in up to 15 minutes before the start time to participate\nTime: 6:00 pm – 8:00pm\nDates: 2 Mondays\nMaximum # of Participants: 4\nProject: Sushi Platter Set made up of a Sushi Platter\, Sauce Dish\, and Chopstick Rest\nDifficulty: Beginner\nAge: 18+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou enjoy making messes while creating\nYou want to create unique pieces for your home\nYou want to get started with pottery\n\nSkills Learned: Handbuilding\, Shaping\, Working with Bisqueware\, Underglaze Painting\, Dip Glazing \nClass Goals: To familiarize yourself with the steps of pottery and enjoy yourself in the process! \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nAttire \nRequired: \n\nClosed-toe shoes\nLong hair tied back\n\nRecommended \n\nWear old clothes that you aren’t afraid to get a little muddy!\nApron (highly recommended)\n\nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 18. Anybody above the age of 18 or older is welcomed to join! \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be cancelled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-sushi-platter-set-handbuilding-pottery-for-adults-6/
LOCATION:Maker Cube – Langley Makerspace\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2023/05/PXL_20230612_230345067-2-scaled-e1700534813235.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.108599;-122.652262
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260512T180000
DTEND;TZID=America/Vancouver:20260512T210000
DTSTAMP:20260403T144208
CREATED:20260224T222734Z
LAST-MODIFIED:20260224T222734Z
UID:10001044-1778608800-1778619600@events.makercube.ca
SUMMARY:Laser Cutting and Engraving
DESCRIPTION:Learn how to customize your projects with the power of laser cutting! Laser cutting is used to add unique designs\, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic\, wood\, plywood\, MDF\, cardboard\, cork\, mylar and more! \nYou’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class\, you will have made your own integrated hinge box using MDF or acrylic! \nCome to our Laser workshop if: \n\nYou’ve always wanted to fire high powered lasers\nYou want to etch intricate designs into your projects\nYou like making finger pistols and going “Pew! Pew! Pew!”\nYou need to precisely cut shapes from sheet materials\n\nDetails: \nDuration: 3 hours \n6:00pm – 9:00pm on weekdays \nMaximum # of Participants: 4 \nProject: MDF or Acrylic laser cut box \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with vector programs like Illustrator or Inkscape is a plus! \n**Please note registration closes 24 hours prior to class** \nSkills learned: \n\nTool Safety procedures and routines\nSetting up your design files\nCreating clean cuts for different applications and materials\nOptimizing your time on the machine\n\nEquipment covered: \n\nLaser Cutter\nLaser support systems\n\nSafety First! \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\n\nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nClick here to learn more about membership at Maker Cube. \nAbout the Instructor: \n\nDoug Chan\, Director and Co-founder at Maker Cube\nDoug is an engineering graduate and serial entrepreneur\, with an aptitude for technology and rapid prototyping. Previously working in several start-ups\, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing\, metal fabrication to PCB fabrication\, he has explored a wide range of processes and techniques. As an enthusiastic learner\, Doug is passionate about passing on the skills he learns\, teaching others to take the leap and trying new things. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/laser-cutting-and-engraving-7/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/bbdaf0cd23a7ebe445699b01a8b1c1f4-XT838P.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260513T180000
DTEND;TZID=America/Vancouver:20260513T200000
DTSTAMP:20260403T144208
CREATED:20260225T001355Z
LAST-MODIFIED:20260225T001355Z
UID:10001053-1778695200-1778702400@events.makercube.ca
SUMMARY:VCarve Pro 2D Drawing and CAD
DESCRIPTION:Enter a realm of infinite design possibilities and turn simple 2D designs into 3D carvings with VCarve Pro. We will walk you through the step-by-step design process and get you comfortable with the software. \nCome to our workshop if: \nYou want to design your very own unique product \nYou’ve got a doodle on a napkin but want to create a professional representation of your idea \nYou are interested in learning automated fabrication tools like CNC mills \nNot a member? If you love the workshop and want more classes or access to our facilities\, check out our monthly memberships. \nDetails: \nDuration: 2 hours \n6:00pm – 8:00pm on weekdays \nClass Capacity: 2-4 \nSkills Learned: Experience navigating\, designing\, and drawing with VCarve Pro. Importing Artwork and Generating G-Code for CNC machining. \nPrerequisites: None.  \nRecommended: Basic computer competency (how to use a computer\, browse the internet)\, CNC Router Table  \n**Please note registration closes 24 hours prior to class** \nClass Goals: \nParticipants in this class will learn how to think and design in 3D! With the help of our instructor\, participants will be introduced to V-Carve\, navigating a 3D workspace and utilizing a variety of modelling tools to design a projects for fabrication. Learning the underlying thought process of how a physical shape can be manufactured will be what participants use to drive their design process. By the end of the class\, everyone will have a basic understanding of how to use the software to design a project for fabrication and can use the resulting files in our other classes;laser cutting\, CNC milling\, 3D printing. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees are not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration the class will be canceled and participants registered will be rescheduled to an alternate class date. \nLearn more about Maker Cube and check out our other classes and events at www.makercube.ca
URL:https://events.makercube.ca/event/vcarve-pro-2d-drawing-and-cad-2/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2023/08/V-carve.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260516T103000
DTEND;TZID=America/Vancouver:20260516T140000
DTSTAMP:20260403T144208
CREATED:20260320T010504Z
LAST-MODIFIED:20260320T011414Z
UID:10001080-1778927400-1778940000@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours to 4 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-4/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260519T180000
DTEND;TZID=America/Vancouver:20260519T213000
DTSTAMP:20260403T144208
CREATED:20260224T223731Z
LAST-MODIFIED:20260224T223731Z
UID:10001045-1779213600-1779226200@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:30pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3.5 hours) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Find out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260520T180000
DTEND;TZID=America/Vancouver:20260520T213000
DTSTAMP:20260403T144208
CREATED:20260225T002056Z
LAST-MODIFIED:20260225T002056Z
UID:10001056-1779300000-1779312600@events.makercube.ca
SUMMARY:CNC Router Table Orientation: Computer-Aided Manufacturing (CAM)
DESCRIPTION:If you’ve ever wanted to bring your designs to life\, join us for an immersive experience where you’ll delve into the essentials of Computer-Aided Manufacturing (CAM) and learn the skills needed to operate CNC machines effectively. This class is tailored for beginners and anyone interested in the endless possibilities of CNC machining. \nSign up now and unlock the potential to shape your creations with precision and accuracy! \nCome to our workshop if: \n\nYou’re eager to create precise and intricate parts with CNC technology.\nYou are looking for efficient and cost-effective solutions for production.\nYou enjoy customizing projects and exploring diverse design variations.\n\nDetails: \nDuration: 3 hours \nClass Capacity: 2 to 6 participants \nPrerequisites: None \nOptional: 2D Modelling with VCarve Pro or 3D Modelling with Fusion360 for Computer-aided design (CAD)\nPlease note\, we do not cover the process of CAD for creating\, designing\, or modifying files for the CNC in this class. If you are interested in learning about how to create your files\, register online for our VCarve class here. \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nIntroduction to Computer-Aided Manufacturing (CAM) set-up on VCarve Pro\nUnderstanding the basics of CNC machining\nWalkthrough for setting up the X35 CNC machine\n\nEquipment covered: \n\nOnefinity x35 CNC Machine (32″x32″ Bed)\n\nClass Goals: \nBy the end of the class\, participants will be familiar with the CNC process and be authorized to use the CNC independently as a member of Maker Cube at the discretion of the instructor. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/cnc-router-table-orientation-computer-aided-manufacturing-cam-4/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/6f9d4a1360e5ffb0c35d6f32f81dcc56-aCH98k.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260521T180000
DTEND;TZID=America/Vancouver:20260521T213000
DTSTAMP:20260403T144208
CREATED:20260224T234355Z
LAST-MODIFIED:20260224T234355Z
UID:10001049-1779386400-1779399000@events.makercube.ca
SUMMARY:Rough to Smooth - Advanced Woodworking
DESCRIPTION:Unlock the secrets of milling rough lumber for woodworking projects! Learn to identify wood grain and structure for optimal results and safety. \nFor Beginners: Don’t be intimidated. Our instructors have been in your shoes and will work hard to make sure you have a great experience. \nFor Experienced Makers:  Orientation classes are mandatory for all tool areas but there’s no reason why you can’t have a good time. Let us challenge you with a new technique or help you brush up on the basics. \nProject: Milling down rough lumber \nDifficulty: Intermediate \nPrerequisite: Intro to Wood Working Class You must take the introductory class prior to taking the Advanced class.  Click here to view upcoming Intro to Woodworking classes \nAge: 14+ \nDuration: 3.5 hours – you must arrive 15 minutes before the start time to participate. The class will start as scheduled\, please be respectful to the instructor and other participants by arriving on time. \n**Please note registration closes 24 hours prior to class** \nCome to our Woodworking workshop if:\n\nYou want to enhance your wood working projects\nYou like precision in your craftsmanship\nYou want to have access to more tools\n\nSkills Learned: How to mill rough lumber for use in woodworking projects. Identifying wood\, it’s grain\, and structure to ensure the best and safest results. \nDuring the class\, you will learn and demonstrate competency with each tool. Members will be authorized to use the tools independently as members of Maker Cube at the discretion of the instructor. Please note that based on attendance this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nRequired: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nAbout the Instructor: \n\nAdam Ali\, Director and Co-founder at Maker Cube\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/rough-to-smooth-advanced-woodworking-6/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/42a317b3820f2ac120ff6688859bda52-DOInIY.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260524T130000
DTEND;TZID=America/Vancouver:20260524T160000
DTSTAMP:20260403T144208
CREATED:20260303T082339Z
LAST-MODIFIED:20260303T082339Z
UID:10001072-1779627600-1779638400@events.makercube.ca
SUMMARY:Resin 3D Printing
DESCRIPTION:Get Started 3D Printing with Resin!\n\n\nWelcome to the fascinating world of 3D printing! If you’re looking to level up the quality of your 3D printing work\, then this is the perfect class for you. Our Resin 3D printing orientation will provide you with the fundamental knowledge you need to start working with a resin 3D printer. This class is designed for those who are interested in creating high detailed parts. You do not need any experience with FDM printing to get started with Resin 3d Printing. It is recommended if you’re new to 3D printing\,  to learn a little about FDM 3D printing first. You can learn about this process in our 3D Printing class.\n\n\nCome to our workshop if: \n\nYou are interested in learning about resin 3D printing processes\nYou want to print high-detail miniatures\nYou need to create complex prototypes\n\nDetails: \nDuration: 2 hours \nMaximum # of Participants: 4 \nRecommend class: What the Heck is it: 3D Printing \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nIntroduction to Resin 3D Printing\nWorkflow process and software orientation\nFinishing and post processing techniques\n\nEquipment covered: \n\nResin 3D Printer (Anycubic Mono X)\n3D printing Slicer: Lychee Slicer\n\nSafety First! \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/resin-3d-printing-2/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://events.makercube.ca/wp-content/uploads/sites/2/2023/06/Resin.png
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260526T180000
DTEND;TZID=America/Vancouver:20260526T210000
DTSTAMP:20260403T144208
CREATED:20260224T222901Z
LAST-MODIFIED:20260224T222901Z
UID:10001043-1779818400-1779829200@events.makercube.ca
SUMMARY:Laser Cutting and Engraving
DESCRIPTION:Learn how to customize your projects with the power of laser cutting! Laser cutting is used to add unique designs\, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic\, wood\, plywood\, MDF\, cardboard\, cork\, mylar and more! \nYou’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class\, you will have made your own integrated hinge box using MDF or acrylic! \nCome to our Laser workshop if: \n\nYou’ve always wanted to fire high powered lasers\nYou want to etch intricate designs into your projects\nYou like making finger pistols and going “Pew! Pew! Pew!”\nYou need to precisely cut shapes from sheet materials\n\nDetails: \nDuration: 3 hours \n6:00pm – 9:00pm on weekdays \nMaximum # of Participants: 4 \nProject: MDF or Acrylic laser cut box \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with vector programs like Illustrator or Inkscape is a plus! \n**Please note registration closes 24 hours prior to class** \nSkills learned: \n\nTool Safety procedures and routines\nSetting up your design files\nCreating clean cuts for different applications and materials\nOptimizing your time on the machine\n\nEquipment covered: \n\nLaser Cutter\nLaser support systems\n\nSafety First! \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\n\nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nClick here to learn more about membership at Maker Cube. \nAbout the Instructor: \n\nDoug Chan\, Director and Co-founder at Maker Cube\nDoug is an engineering graduate and serial entrepreneur\, with an aptitude for technology and rapid prototyping. Previously working in several start-ups\, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing\, metal fabrication to PCB fabrication\, he has explored a wide range of processes and techniques. As an enthusiastic learner\, Doug is passionate about passing on the skills he learns\, teaching others to take the leap and trying new things. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/laser-cutting-and-engraving-8/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/bbdaf0cd23a7ebe445699b01a8b1c1f4-XT838P.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260527T180000
DTEND;TZID=America/Vancouver:20260527T210000
DTSTAMP:20260403T144208
CREATED:20260225T034119Z
LAST-MODIFIED:20260225T034224Z
UID:10001062-1779904800-1779915600@events.makercube.ca
SUMMARY:Amplified! Build A Bluetooth Speaker
DESCRIPTION:Build your Own Bluetooth Speaker \nDelve into the world of audio engineering exploring concepts like frequency response\, phase\, and enclosure design. Develop a keen ear for different sound qualities. \nDuring this workshop\, you will construct\, assemble\, solder\, fabric wrap and bring all the components of the speaker together. \nDuration: 3 sessions\, 3 hours each\, – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:00pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3 hours) \nMaximum # of Participants: 6 \nProject: Bluetooth Speaker \nDifficulty: Intermediate \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to take on a guided project-based class while challenging yourself with new skills\nYou are interested in learning about audio engineering techniques\n\nClass Goals: \nBy the end of the class\, participants will develop a better understanding of audio engineering and develop a keen ear for different sound qualities.  All participants will be introduced to electronics\, woodworking\, and upholstery. After the class\, everyone will take home their own speaker. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/amplified-build-a-bluetooth-speaker-3/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Workshop
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/08/PXL_20240719_213647515.PORTRAIT-edited-scaled.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260527T180000
DTEND;TZID=America/Vancouver:20260527T213000
DTSTAMP:20260403T144208
CREATED:20260226T041940Z
LAST-MODIFIED:20260315T003409Z
UID:10001066-1779904800-1779917400@events.makercube.ca
SUMMARY:MIG Welding Basics
DESCRIPTION:Take home your very own rocket stove in this introductory welding class!\n\n\nIn this introductory level MIG welding orientation\, you can get hands on experience with tools in the metal shop and learn the step by step process to create clean strong welds. You will carry out several operations to prep your material\, tack your pieces and lay a simple bead. This process aims to make you comfortable using the tools and gain welding experience. All of this combined will make your very own rocket stove! \nDuration: 3 hours \nTime: 1:00pm-4:00pm (please note the class may exceed 3 hours and go until 4:30) \nMaximum Participants: four (4) \n**Please note registration closes 24 hours prior to class** \nClass Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld\, tacking a weld\, creating T joints and the outside corners of welds\, and fitting a MIG weld into your project. The final project will be a rocket stove you can proudly take home and use. \nOur instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time. \nAfter the orientation\, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool. \nCome to our workshop if :\nYou want to increase your exposure to welding \nYou are not scared of a few sparks flying (literally) \nYou want to make your own iron man suit \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nSafety First\nRequired: \n\nWelding Mask (We strongly recommended that participants bring their own welding shield\, if a participant does not have a welding mask\, a sanitized welding mask will be provided)\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed Toed Shoes (preferably boots)\nDenim jeans\nLong sleeves\nLong hair tied back\nNo loose jewelry\nNo flammable materials (synthetic material such as polyester\,nylon etc.)\n\nRecommended: \n\nSteel toed boots\nA baseball cap\n\nPrerequisites: None \nTools Learned: \n\nAngle Grinders\nMIG welder\n\nAbout the Instructor : \n\nCorey Gerard – Welding Instructor at Maker Cube\nCorey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy\, precision measures and water jet cutting\, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting\, graphic design and brewing beer! \nIn his space time when he’s not tinkering at Maker Cube\, Corey enjoys; rock climbing in the summer\, snow boarding in the winter\, playing guitar and drinking an ice cold beer. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park ? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nFor more information about membership\, visit http://makercube.ca/how-to-become-a-maker
URL:https://events.makercube.ca/event/mig-welding-basics-4/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/ad4ecbc431519900c66338c9d1a7bf4b-Q2jM9A.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260529T180000
DTEND;TZID=America/Vancouver:20260529T200000
DTSTAMP:20260403T144208
CREATED:20260225T002926Z
LAST-MODIFIED:20260320T005243Z
UID:10001057-1780077600-1780084800@events.makercube.ca
SUMMARY:Router Table Orientation
DESCRIPTION:Learn about Router Table Basics \nThis workshop will teach you the basics of the Router Table. Join us if you’re looking for more experience on woodshop tools! During this workshop you will learn about different bits\, profiling edge\, rabbets\, different tips and tricks for handling material\, and setting up your cut safely. \nDuration: 1.5-2 hours – please arrive on time to participate \n6:00pm – 8:00pm \nClass Capacity: 2-6 \nDifficulty: Beginner \nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou want to know the difference between a groove and dado.\nYou love challenging yourself by learning new skills.\n\nSkills Learned: \n\nDifferent bits and how they are used\nBasics to profiling with the Router Table\nSetting up the Router Table for Rabbets\, Dado\, and Grooves\n\nClass Goals: \nBy the end of the class\, participants will be comfortable to safely run the Router table to use it for a couple of simple setups. You will get hands-on practice time for profiling and dados. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/router-table-orientation-5/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/6eebbe0a0c87b2048d6332e5f03ca0b4-REpB0E.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260530T103000
DTEND;TZID=America/Vancouver:20260530T143000
DTSTAMP:20260403T144208
CREATED:20260320T011853Z
LAST-MODIFIED:20260320T011853Z
UID:10001082-1780137000-1780151400@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours to 4 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-5/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260531T180000
DTEND;TZID=America/Vancouver:20260531T210000
DTSTAMP:20260403T144208
CREATED:20260303T083329Z
LAST-MODIFIED:20260303T083329Z
UID:10001076-1780250400-1780261200@events.makercube.ca
SUMMARY:Plasma Cutting Orientation
DESCRIPTION:Save time and money with Plasma Cutting! A CNC plasma system is a precision cutting tool for sheet metal up to 3/8″ thick. Join us for an immersive experience where you’ll delve into the essentials of Computer-Aided Manufacturing (CAM) and learn the skills needed to operate the Plasma Cutting CNC effectively. This class is tailored for beginners and anyone interested in the endless possibilities. \nSign up now and unlock the potential to shape your creations with precision and accuracy! \nCome to our workshop if: \n\nYou’re eager to create precise and intricate parts with CNC technology.\nYou are looking for efficient and cost-effective solutions for production.\nYou enjoy customizing projects and exploring diverse design variations.\n\nDetails: \nDuration: 3 hours \nClass Capacity: 2 to 6 participants \nPrerequisites: None \nAge: 14+ \nOptional: 2D Modelling with VCarve Pro or 3D Modelling with Fusion360 for Computer-aided design (CAD)\nPlease note\, we do not cover the process of CAD for creating\, designing\, or modifying files for the CNC in this class. If you are interested in learning about how to create your files\, register online for our vCarve 2D Drafting Class or Fusion 3D Modelling class. \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nHow the Plasma Works\nSafety Guidelines\nFile Setup in Plasma CAM\nTool Setup\nTroubleshooting\n\nEquipment covered: \n\nHypertherm PowerMax\n\nClass Goals: \nBy the end of the class\, participants will be familiar with the CNC process and be authorized to use the CNC independently as a member of Maker Cube at the discretion of the instructor. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/plasma-cutting-orientation-3/
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://events.makercube.ca/wp-content/uploads/sites/2/2020/06/Class-Image-Plasma-CNC.png
END:VEVENT
END:VCALENDAR