Maker Cube Events

Router Table Orientation
2025-05-30 16:00 - 18:00, 2025-06-27 16:00 - 18:00, 2025-07-18 16:00 - 18:00 (America/Vancouver) | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Learn about Router Table Basics
This workshop will teach you the basics of the Router Table. Join us if you’re looking for more experience on woodshop tools! During this workshop you will learn about different bits, profiling edge, rabbets, different tips and tricks for handling material, and setting up your cut safely.
Duration: 1.5-2 hours – please arrive on time to participate
4:00pm – 6:00pm
Class Capacity: 2-6
Difficulty: Beginner
Age: 14+
**Please note registration closes 24 hours prior to class**
Come to our workshop if:

You want to know the difference between a groove and dado.
You love challenging yourself by learning new skills.

Skills Learned:

Different bits and how they are used
Basics to profiling with the Router Table
Setting up the Router Table for Rabbets, Dado, and Grooves

Class Goals:
By the end of the class, participants will be comfortable to safely run the Router table to use it for a couple of simple setups. You will get hands-on practice time for profiling and dados.
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop.
Click here to learn more about membership at Maker Cube.
Safety First
General attire requirements:

Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)
Mask (if you have sensitivities to sawdust/airborne dust)
Closed-toe shoes
Long hair tied back
No loose jewelry or cords
No long sleeved shirts or loose clothing

What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Make Your Own Cutting Board - Introduction to Woodworking
2025-06-05 18:00 - 21:30, 2025-06-12 18:00 - 21:30, 2025-06-19 18:00 - 21:30, 2025-07-03 18:00 - 21:30 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Learn How to Create Your Own Beautiful Maple, Purpleheart, and Walnut Cutting Board!
This beginner-level workshop will teach you the basics of woodworking, including safe handling of common tools. Besides learning tool safety, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood, glue joints, use power tools safely, and shape your project.
Duration: 3.5 hours – please arrive 15 minutes before the start time to participate.
6:00pm – 9:30pm on weekdays (please note: depending on the participants, the class may run late and exceed 3.5 hours)
Maximum # of Participants: 6.
Project: Eastern Maple, Purpleheart, & Black Walnut Cutting Board.
Difficulty: Beginner.
Age: 14+.
**Please note registration closes 24 hours prior to class**
Come to our workshop if:

You’re looking for a different way to unwind after work
You want to be a part of a community of creatives
You love challenging yourself by learning new skills

Skills Learned:
You will learn how to work with hardwood, glue up joints, using power tools safely, shape and sand, and then apply a food safe finish.

Ticket Types:
Intro to Wood – Regular Registration for the Woodworking class
Intro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Fnd out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/
Intro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space, discounts on additional classes, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.
Terms: Membership starts on the next 1st or the 15th of the month.

Class Goals:
By the end of the class, participants will be comfortable with the operation of various power tools including a drill press, band saw, miter saw, belt and spindle sander, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class, everyone will learn about each tool, and get the opportunity to demonstrate their competency on each tool, by making their own cutting board. After this class, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note, that based on attendance, this tool training may not provide significant practice with each tool, nor discuss any intermediate or advanced techniques.
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop.
Click here to learn more about membership at Maker Cube.
Safety First
General attire requirements:

Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)
Mask (if you have sensitivities to sawdust/airborne dust)
Closed-toe shoes
Long hair tied back
No loose jewelry or cords
No long sleeved shirts or loose clothing

What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

MIG Welding Basics
2025-06-08 13:00 - 16:00, 2025-06-22 13:00 - 16:00, 2025-07-13 13:00 - 16:00, 2025-07-27 13:00 - 16:00 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Take home your very own rocket stove in this introductory welding class!

In this introductory level MIG welding orientation, you can get hands on experience with tools in the metal shop and learn the step by step process to create clean strong welds. You will carry out several operations to prep your material, tack your pieces and lay a simple bead. This process aims to make you comfortable using the tools and gain welding experience. All of this combined will make your very own rocket stove!
Duration: 3 hours
Time: 1:00pm-4:00pm (please note the class may exceed 3 hours and go until 4:30)
Maximum Participants: four (4)
**Please note registration closes 24 hours prior to class**
Class Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld, tacking a weld, creating T joints and the outside corners of welds, and fitting a MIG weld into your project. The final project will be a rocket stove you can proudly take home and use.
Our instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time.
After the orientation, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool.
Come to our workshop if :
You want to increase your exposure to welding
You are not scared of a few sparks flying (literally)
You want to make your own iron man suit
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube.
Safety First
Required:

Welding Mask (We strongly recommended that participants bring their own welding shield, if a participant does not have a welding mask, a sanitized welding mask will be provided)
Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)
Closed Toed Shoes (preferably boots)
Denim jeans
Long sleeves
Long hair tied back
No loose jewelry
No flammable materials (synthetic material such as polyester,nylon etc.)

Recommended:

Steel toed boots
A baseball cap

Prerequisites: None
Tools Learned:

Angle Grinders
MIG welder

About the Instructor :

Corey Gerard – Welding Instructor at Maker Cube
Corey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy, precision measures and water jet cutting, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting, graphic design and brewing beer!
In his space time when he’s not tinkering at Maker Cube, Corey enjoys; rock climbing in the summer, snow boarding in the winter, playing guitar and drinking an ice cold beer.
FAQS
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park ?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
For more information about membership, visit http://makercube.ca/how-to-become-a-maker

Handbuilding Pottery for Adults
2025-06-09 18:00 - 20:00, 2025-07-07 18:00 - 20:00 | Maker Cube – Langley Makerspace, 5947 206A Street, #104B, Langley City, BC, V3A 8M1, Canada
Come join us in out pottery handbuilding class, and play with clay to make your own bowls and plates!
Pottery is an exceptional art form that transforms clay into functional dinnerware, home decorations, and sculptures. In this beginner-friendly class, you will learn how to handbuild your own pieces using slump molds, carving, shaping, and glazing. You will make your own bowl or plate to take home!
Duration: 2 hour Classes – Please arrive 15 minutes before the start time to participate
Time: 6:00 pm – 800pm
Dates: 2 Mondays
Maximum # of Participants: 4
Project: Sushi Platter Set made up of a Sushi Platter, Sauce Dish, and Chopstick Rest
Difficulty: Beginner
Age: 18+
**Please note registration closes 24 hours prior to class**
Come to our workshop if:

You enjoy making messes while creating
You want to create unique pieces for your home
You want to get started with pottery

Skills Learned: Handbuilding, Shaping, Working with Bisqueware, Underglaze Painting, Dip Glazing
Class Goals: To familiarize yourself with the steps of pottery and enjoy yourself in the process!
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop.
Click here to learn more about membership at Maker Cube.
Attire
Required:

Closed-toe shoes
Long hair tied back

Recommended

Wear old clothes that you aren’t afraid to get a little muddy!
Apron (highly recommended)

FAQS
What is the age limit for the class?
The minimum age for participants is 18. Anybody above the age of 18 or older is welcomed to join!
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be cancelled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Laser Cutting and Engraving
2025-06-10 18:00 - 21:00, 2025-07-15 18:00 - 21:00, 2025-08-05 18:00 - 21:00 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Learn how to customize your projects with the power of laser cutting! Laser cutting is used to add unique designs, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic, wood, plywood, MDF, cardboard, cork, mylar and more!
You’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class, you will have made your own integrated hinge box using MDF or acrylic!
Come to our Laser workshop if:

You’ve always wanted to fire high powered lasers
You want to etch intricate designs into your projects
You like making finger pistols and going “Pew! Pew! Pew!”
You need to precisely cut shapes from sheet materials

Details:
Duration: 3 hours
6:00pm – 9:00pm on weekdays
Maximum # of Participants: 4
Project: MDF or Acrylic laser cut box
Prerequisites: Basic computer literacy (how to use a computer, browse the internet, etc.) required. 2D CAD experience, drawing with vector programs like Illustrator or Inkscape is a plus!
**Please note registration closes 24 hours prior to class**
Skills learned:

Tool Safety procedures and routines
Setting up your design files
Creating clean cuts for different applications and materials
Optimizing your time on the machine

Equipment covered:

Laser Cutter
Laser support systems

Safety First!

Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)

Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube.
Click here to learn more about membership at Maker Cube.
About the Instructor:

Doug Chan, Director and Co-founder at Maker Cube
Doug is an engineering graduate and serial entrepreneur, with an aptitude for technology and rapid prototyping. Previously working in several start-ups, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing, metal fabrication to PCB fabrication, he has explored a wide range of processes and techniques. As an enthusiastic learner, Doug is passionate about passing on the skills he learns, teaching others to take the leap and trying new things.
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

CNC Router Table Orientation: Computer-Aided Manufacturing (CAM)
2025-06-11 18:00 - 21:30, 2025-07-16 18:00 - 21:30 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
If you’ve ever wanted to bring your designs to life, join us for an immersive experience where you’ll delve into the essentials of Computer-Aided Manufacturing (CAM) and learn the skills needed to operate CNC machines effectively. This class is tailored for beginners and anyone interested in the endless possibilities of CNC machining.
Sign up now and unlock the potential to shape your creations with precision and accuracy!
Come to our workshop if:

You’re eager to create precise and intricate parts with CNC technology.
You are looking for efficient and cost-effective solutions for production.
You enjoy customizing projects and exploring diverse design variations.

Details:
Duration: 3 hours
Class Capacity: 2 to 6 participants
Prerequisites: None
Optional: 2D Modelling with VCarve Pro or 3D Modelling with Fusion360 for Computer-aided design (CAD)
Please note, we do not cover the process of CAD for creating, designing, or modifying files for the CNC in this class. If you are interested in learning about how to create your files, register online for our VCarve class here.
**Please note registration closes 24 hours prior to class**
Topics covered:

Introduction to Computer-Aided Manufacturing (CAM) set-up on VCarve Pro
Understanding the basics of CNC machining
Walkthrough for setting up the X35 CNC machine

Equipment covered:

Onefinity x35 CNC Machine (32″x32″ Bed)

Class Goals:
By the end of the class, participants will be familiar with the CNC process and be authorized to use the CNC independently as a member of Maker Cube at the discretion of the instructor.
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube.
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Epoxy Workshop
2025-06-14 13:00 - 2025-06-21 17:00 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Join us at Maker Cube to learn about Epoxy in our two-session epoxy workshop! Epoxy is a liquid two-part plastic, a resin and a hardener, that can be mixed to create a clear and hard surface once cured. It can be used for projects such as river tables or serving trays, or used as a high gloss coating for projects.
Avoid spending unnecessary money and time to practice through trial and error. Whether you are interested in making small pieces like epoxy coasters or want to start on your dream river table, you need to know how to pick the right epoxy for your project. In this class, you will get started with the basics and learn how to set up a form to achieve the best results!
Day 1 – Learn about resins and epoxy and how to select the right product for your project, how to prepare the wood and to make a leak-proof form. Pick your favourite pigment colour and pour the epoxy.
Day 2 – Demolding the charcuterie board, optional shaping, sanding, and finishing. For a final touch, we will use Maker Cube’s Wood Waker Deep Penetrating oil for added lustre and protection. Learn more about this finish at https://woodwaker.ca/
Project: 10″x16″ Black Walnut and Epoxy Herringbone Charcuterie Board
Difficulty: Intermediate
Age: 14+
Class Capacity: 4-6
Highly Recommended Class: Introduction to Woodworking
Recommended Class: Advanced Woodworking
Duration: 2 session. 4-5 hours each – you must arrive 15 minutes before the start time to participate. The class will start as scheduled, please be respectful to the instructor and other participants by arriving on time.
Come to our Epoxy workshop if:

You want to learn how to pick the right epoxy.
You want to get started working with epoxy safely!
You want to stop spending money and time on trial and error.

About the Instructor:

Adam Ali, Director and Co-founder at Maker Cube
Adam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts, soapbox racers, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking, metal fabrication, music production, and media arts. For the past 10 years, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions.
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

What the Heck is it: 3D Printing
2025-06-15 13:00 - 16:00, 2025-07-06 13:00 - 16:00 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Welcome to the fascinating world of 3D printing! If you’ve ever wondered how to transform your design ideas into physical objects, then this is the class for you. Our introduction to 3D printing will teach you the basics you need to know to get started on your journey toward bringing your designs to life. This class is perfect for beginners and anyone curious about the possibilities of 3D printing. Learn the in’s and out’s of operating our printers, as well as tips and tricks to get the best quality prints as we orient you on our Anet A8 3D Printers; Nemo and Dory!
Sign up now and unleash your creativity in a whole new dimension!
Come to our workshop if:

You want to create accessible simple solutions to everyday problems
You need faster production at an affordable cost
You like to customize your projects and explore variations in design

Details:
Duration: 3 hours
Class Capacity: 2 to 4 participants
Prerequisites: None.
**Please note registration closes 24 hours prior to class**
Topics covered:

Introduction to how 3D Printers operate and the differences between printer types
Workflow process and software orientation
Finishing and post processing techniques

Equipment covered:

3D Printers: Anet A8
3D printing software: Ultimaker Cura

Safety First!
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube.
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Rough to Smooth - Advanced Woodworking
2025-06-17 18:00 - 21:30, 2025-07-08 18:00 - 21:30 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Unlock the secrets of milling rough lumber for woodworking projects! Learn to identify wood grain and structure for optimal results and safety.
For Beginners: Don’t be intimidated. Our instructors have been in your shoes and will work hard to make sure you have a great experience.
For Experienced Makers: Orientation classes are mandatory for all tool areas but there’s no reason why you can’t have a good time. Let us challenge you with a new technique or help you brush up on the basics.
Project: Milling down rough lumber
Difficulty: Intermediate
Prerequisite: Intro to Wood Working Class You must take the introductory class prior to taking the Advanced class. Click here to view upcoming Intro to Woodworking classes
Age: 14+
Duration: 3.5 hours – you must arrive 15 minutes before the start time to participate. The class will start as scheduled, please be respectful to the instructor and other participants by arriving on time.
**Please note registration closes 24 hours prior to class**
Come to our Woodworking workshop if:

You want to enhance your wood working projects
You like precision in your craftsmanship
You want to have access to more tools

Skills Learned: How to mill rough lumber for use in woodworking projects. Identifying wood, it’s grain, and structure to ensure the best and safest results.
During the class, you will learn and demonstrate competency with each tool. Members will be authorized to use the tools independently as members of Maker Cube at the discretion of the instructor. Please note that based on attendance this tool training may not provide significant practice with each tool, nor discuss any intermediate or advanced techniques.
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop.
Click here to learn more about membership at Maker Cube.
Safety First
Required:

Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)
Closed-toe shoes
Long hair tied back
No loose jewelry or cords
No long sleeved shirts or loose clothing

About the Instructor:

Adam Ali, Director and Co-founder at Maker Cube
Adam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts, soapbox racers, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking, metal fabrication, music production, and media arts. For the past 10 years, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions.
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Fusion 360 – Design Thinking and 3D Modelling
2025-06-25 18:00 - 21:30, 2025-07-02 18:00 - 21:30 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Enter a realm of infinite design possibilities with 3D modelling. We will walk you through the step by step design process using Fusion 360.
Come to our workshop if:
You want to design your very own unique product
You’ve got a doodle on a napkin but want to create a professional representation of your idea
You are interested in learning automated fabrication tools like CNC mills
Not a member? If you love the workshop and want more classes or access to our facilities, check out our monthly memberships.
Details:
Duration: 3.5 hours
6:00pm – 9:30pm on weekdays
Maximum # of Participants: 6
Project: Skill building experience with Fusion 360
Prerequisites: None.
Participants must bring a laptop and mouse to the class with Fusion 360 already downloaded and installed!
Recommended: Basic computer competency (how to use a computer, browse the internet)
**Please note registration closes 24 hours prior to class**
Class Goals:
Participants in this class will learn how to think and design in 3D! With the help of our instructor, participants will be introduced to Fusion 360, navigating a 3D workspace and utilizing a variety of modelling tools to design a projects for fabrication. Learning the underlying thought process of how a physical shape can be manufactured will be what participants use to drive their design process. By the end of the class, everyone will have a basic understanding of how to use the software to design a project for fabrication and can use the resulting files in our other classes;laser cutting, CNC milling, 3D printing.
About the Instructor:
Adam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts, soapbox racers, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights, windows and (of course) a secret escape hatch.
He followed his passion through school taking as many courses as he could in woodworking, metal fabrication, music production, and media arts. For the past 10 years, Adam has built skillsets in many disciplines with his favourite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions.
Learn more about Maker Cube and check out our other classes and events at www.makercube.ca
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
2025-06-28 10:30 - 14:00, 2025-07-19 10:30 - 14:00 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Learn How to Create Your Own Beautiful Maple, Purpleheart, and Walnut Cutting Board!
This beginner-level workshop will teach you the basics of woodworking, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood, glue joints, use power tools safely, and shape your project.
Duration: 3.5 hours – please arrive 15 minutes before the start time to participate
Weekend Session: 10:30AM – 2:00PM (please note: depending on the participants, the class may run late and exceed 3.5 hours)
Maximum # of Participants: 6
Project: Eastern Maple, Purpleheart, & Black Walnut Cutting Board
Difficulty: Beginner
Age: 14+
**Please note registration closes 24 hours prior to class**
Come to our workshop if:

You’re looking for a different way to unwind after work
You want to be a part of a community of creatives
You love challenging yourself by learning new skills

Skills Learned:
You will learn how to work with hardwood, glue up joints, using power tools safely, shape and sand, and then apply a food safe finish.
Class Goals:
By the end of the class, participants will be comfortable with the operation of various power tools including a drill press, band saw, miter saw, belt and spindle sander, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class, everyone will learn about each tool, and get the opportunity to demonstrate their competency on each tool, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance, this tool training may not provide significant practice with each tool, nor discuss any intermediate or advanced techniques.
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop.
Click here to learn more about membership at Maker Cube.
Safety First
General attire requirements:

Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)
Mask (if you have sensitivities to sawdust/airborne dust)
Closed-toe shoes
Long hair tied back
No loose jewelry or cords
No long sleeved shirts or loose clothing

What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Resin 3D Printing
2025-06-29 13:00 - 15:00 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Get Started 3D Printing with Resin!

Welcome to the fascinating world of 3D printing! If you’re looking to level up the quality of your 3D printing work, then this is the perfect class for you. Our Resin 3D printing orientation will provide you with the fundamental knowledge you need to start working with a resin 3D printer. This class is designed for those who are interested in creating high detailed parts. You do not need any experience with FDM printing to get started with Resin 3d Printing. It is recommended if you’re new to 3D printing, to learn a little about FDM 3D printing first. You can learn about this process in our 3D Printing class.

Come to our workshop if:

You are interested in learning about resin 3D printing processes
You want to print high-detail miniatures
You need to create complex prototypes

Details:
Duration: 2 hours
Maximum # of Participants: 4
Recommend class: What the Heck is it: 3D Printing
**Please note registration closes 24 hours prior to class**
Topics covered:

Introduction to Resin 3D Printing
Workflow process and software orientation
Finishing and post processing techniques

Equipment covered:

Resin 3D Printer (Anycubic Mono X)
3D printing Slicer: Lychee Slicer

Safety First!
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube.
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Vinyl Plotting: Making Decals and Stencils
2025-07-04 16:00 - 17:30 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
DIY Vinyl Decal
Vinyl stickers are weather-resistant. It can last up to 3 years for indoor use and up to 1 year for outdoor application.
**Please note registration closes 24 hours prior to class**
Duration: 1.5 hours – please arrive early, the workshop will start promptly
Class Capacity: 2-4
Difficulty: Beginner
Age: 8+ Minors must be accompanied by a parent or guardian
Class Goals:
You will learn how to create designs, how to optimize your file for vinyl plotting, how to weed (remove excess vinyl) to reveal your design, and how to apply vinyl to flat surfaces.
Not a member? If you love the workshop and want more classes or access to our facilities, check out our monthly memberships. Click here to learn more about membership at Maker Cube.
General attire:

Closed toed shoes
Long hair tied back

What is the age limit for the class?
The minimum age for participants is 8. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

VCarve Pro 2D Drawing and CAD
2025-07-09 18:00 - 20:00 | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Enter a realm of infinite design possibilities and turn simple 2D designs into 3D carvings with VCarve Pro. We will walk you through the step-by-step design process and get you comfortable with the software.
Come to our workshop if:
You want to design your very own unique product
You’ve got a doodle on a napkin but want to create a professional representation of your idea
You are interested in learning automated fabrication tools like CNC mills
Not a member? If you love the workshop and want more classes or access to our facilities, check out our monthly memberships.
Details:
Duration: 2 hours
6:00pm – 8:00pm on weekdays
Class Capacity: 2-4
Skills Learned: Experience navigating, designing, and drawing with VCarve Pro. Importing Artwork and Generating G-Code for CNC machining.
Prerequisites: None.
Recommended: Basic computer competency (how to use a computer, browse the internet), CNC Router Table
**Please note registration closes 24 hours prior to class**
Class Goals:
Participants in this class will learn how to think and design in 3D! With the help of our instructor, participants will be introduced to V-Carve, navigating a 3D workspace and utilizing a variety of modelling tools to design a projects for fabrication. Learning the underlying thought process of how a physical shape can be manufactured will be what participants use to drive their design process. By the end of the class, everyone will have a basic understanding of how to use the software to design a project for fabrication and can use the resulting files in our other classes;laser cutting, CNC milling, 3D printing.
FAQS
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees are not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration the class will be canceled and participants registered will be rescheduled to an alternate class date.
Learn more about Maker Cube and check out our other classes and events at www.makercube.ca
