BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Maker Cube Events - ECPv6.15.16//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Maker Cube Events
X-ORIGINAL-URL:https://events.makercube.ca
X-WR-CALDESC:Events for Maker Cube Events
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Vancouver
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260103T103000
DTEND;TZID=America/Vancouver:20260103T140000
DTSTAMP:20260403T121230
CREATED:20251201T225521Z
LAST-MODIFIED:20251208T232418Z
UID:10000965-1767436200-1767448800@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First\nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class?\nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park?\nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class?\nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-31/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260104T130000
DTEND;TZID=America/Vancouver:20260104T160000
DTSTAMP:20260403T121230
CREATED:20251221T201911Z
LAST-MODIFIED:20251221T201911Z
UID:10000984-1767531600-1767542400@events.makercube.ca
SUMMARY:MIG Welding Basics
DESCRIPTION:Take home your very own rocket stove in this introductory welding class!\n\n\nIn this introductory level MIG welding orientation\, you can get hands on experience with tools in the metal shop and learn the step by step process to create clean strong welds. You will carry out several operations to prep your material\, tack your pieces and lay a simple bead. This process aims to make you comfortable using the tools and gain welding experience. All of this combined will make your very own rocket stove! \nDuration: 3 hours \nTime: 1:00pm-4:00pm (please note the class may exceed 3 hours and go until 4:30) \nMaximum Participants: four (4) \n**Please note registration closes 24 hours prior to class** \nClass Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld\, tacking a weld\, creating T joints and the outside corners of welds\, and fitting a MIG weld into your project. The final project will be a rocket stove you can proudly take home and use. \nOur instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time. \nAfter the orientation\, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool. \nCome to our workshop if :\nYou want to increase your exposure to welding \nYou are not scared of a few sparks flying (literally) \nYou want to make your own iron man suit \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nSafety First\nRequired: \n\nWelding Mask (We strongly recommended that participants bring their own welding shield\, if a participant does not have a welding mask\, a sanitized welding mask will be provided)\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed Toed Shoes (preferably boots)\nDenim jeans\nLong sleeves\nLong hair tied back\nNo loose jewelry\nNo flammable materials (synthetic material such as polyester\,nylon etc.)\n\nRecommended: \n\nSteel toed boots\nA baseball cap\n\nPrerequisites: None \nTools Learned: \n\nAngle Grinders\nMIG welder\n\nAbout the Instructor : \n\nCorey Gerard – Welding Instructor at Maker Cube\nCorey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy\, precision measures and water jet cutting\, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting\, graphic design and brewing beer! \nIn his space time when he’s not tinkering at Maker Cube\, Corey enjoys; rock climbing in the summer\, snow boarding in the winter\, playing guitar and drinking an ice cold beer. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park ? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nFor more information about membership\, visit http://makercube.ca/how-to-become-a-maker
URL:https://events.makercube.ca/event/mig-welding-basics-40/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/ad4ecbc431519900c66338c9d1a7bf4b-Q2jM9A.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260106T180000
DTEND;TZID=America/Vancouver:20260106T210000
DTSTAMP:20260403T121230
CREATED:20251209T030329Z
LAST-MODIFIED:20260104T183929Z
UID:10000971-1767722400-1767733200@events.makercube.ca
SUMMARY:Laser Cutting and Engraving
DESCRIPTION:Learn how to customize your projects with the power of laser cutting! Laser cutting is used to add unique designs\, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic\, wood\, plywood\, MDF\, cardboard\, cork\, mylar and more! \nYou’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class\, you will have made your own integrated hinge box using MDF or acrylic! \nCome to our Laser workshop if: \n\nYou’ve always wanted to fire high powered lasers\nYou want to etch intricate designs into your projects\nYou like making finger pistols and going “Pew! Pew! Pew!”\nYou need to precisely cut shapes from sheet materials\n\nDetails: \nDuration: 3 hours \n6:00pm – 9:00pm on weekdays \nMaximum # of Participants: 4 \nProject: MDF or Acrylic laser cut box \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with vector programs like Illustrator or Inkscape is a plus! \n**Please note registration closes 24 hours prior to class** \nSkills learned: \n\nTool Safety procedures and routines\nSetting up your design files\nCreating clean cuts for different applications and materials\nOptimizing your time on the machine\n\nEquipment covered: \n\nLaser Cutter\nLaser support systems\n\nSafety First! \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\n\nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nClick here to learn more about membership at Maker Cube. \nAbout the Instructor: \n\nDoug Chan\, Director and Co-founder at Maker Cube\nDoug is an engineering graduate and serial entrepreneur\, with an aptitude for technology and rapid prototyping. Previously working in several start-ups\, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing\, metal fabrication to PCB fabrication\, he has explored a wide range of processes and techniques. As an enthusiastic learner\, Doug is passionate about passing on the skills he learns\, teaching others to take the leap and trying new things. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/laser-cutting-and-engraving-41/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/bbdaf0cd23a7ebe445699b01a8b1c1f4-XT838P.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260108T180000
DTEND;TZID=America/Vancouver:20260108T213000
DTSTAMP:20260403T121230
CREATED:20251208T232058Z
LAST-MODIFIED:20251208T232058Z
UID:10000963-1767895200-1767907800@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:30pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3.5 hours) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Fnd out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-52/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260110T103000
DTEND;TZID=America/Vancouver:20260110T140000
DTSTAMP:20260403T121230
CREATED:20251222T000636Z
LAST-MODIFIED:20260108T232157Z
UID:10000993-1768041000-1768053600@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-37/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260111T130000
DTEND;TZID=America/Vancouver:20260111T160000
DTSTAMP:20260403T121230
CREATED:20251212T223812Z
LAST-MODIFIED:20251221T220327Z
UID:10000982-1768136400-1768147200@events.makercube.ca
SUMMARY:What the Heck is it: 3D Printing
DESCRIPTION:Welcome to the fascinating world of 3D printing! If you’ve ever wondered how to transform your design ideas into physical objects\, then this is the class for you. Our introduction to 3D printing will teach you the basics you need to know to get started on your journey toward bringing your designs to life. This class is perfect for beginners and anyone curious about the possibilities of 3D printing. Learn the in’s and out’s of operating our printers\, as well as tips and tricks to get the best quality prints as we orient you on our Anet A8 3D Printers; Nemo and Dory! \nSign up now and unleash your creativity in a whole new dimension! \nCome to our workshop if: \n\nYou want to create accessible simple solutions to everyday problems\nYou need faster production at an affordable cost\nYou like to customize your projects and explore variations in design\n\nDetails: \nDuration: 3 hours \nClass Capacity: 2 to 4 participants \nPrerequisites: None. \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nIntroduction to how 3D Printers operate and the differences between printer types\nWorkflow process and software orientation\nFinishing and post processing techniques\n\nEquipment covered: \n\n3D Printers: Anet A8\n3D printing software: Ultimaker Cura\n\n \nSafety First! \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/what-the-heck-is-it-3d-printing-19/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/f2f38cf8e76d64d740af2af9b91bd166-ASQMsz.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260113T180000
DTEND;TZID=America/Vancouver:20260113T213000
DTSTAMP:20260403T121230
CREATED:20251130T211750Z
LAST-MODIFIED:20251130T211814Z
UID:10000951-1768327200-1768339800@events.makercube.ca
SUMMARY:Rough to Smooth - Advanced Woodworking
DESCRIPTION:Unlock the secrets of milling rough lumber for woodworking projects! Learn to identify wood grain and structure for optimal results and safety. \nFor Beginners: Don’t be intimidated. Our instructors have been in your shoes and will work hard to make sure you have a great experience. \nFor Experienced Makers:  Orientation classes are mandatory for all tool areas but there’s no reason why you can’t have a good time. Let us challenge you with a new technique or help you brush up on the basics. \nProject: Milling down rough lumber \nDifficulty: Intermediate \nPrerequisite: Intro to Wood Working Class You must take the introductory class prior to taking the Advanced class.  Click here to view upcoming Intro to Woodworking classes \nAge: 14+ \nDuration: 3.5 hours – you must arrive 15 minutes before the start time to participate. The class will start as scheduled\, please be respectful to the instructor and other participants by arriving on time. \n**Please note registration closes 24 hours prior to class** \nCome to our Woodworking workshop if:\n\nYou want to enhance your wood working projects\nYou like precision in your craftsmanship\nYou want to have access to more tools\n\nSkills Learned: How to mill rough lumber for use in woodworking projects. Identifying wood\, it’s grain\, and structure to ensure the best and safest results. \nDuring the class\, you will learn and demonstrate competency with each tool. Members will be authorized to use the tools independently as members of Maker Cube at the discretion of the instructor. Please note that based on attendance this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nRequired: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nAbout the Instructor: \n\nAdam Ali\, Director and Co-founder at Maker Cube\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/rough-to-smooth-advanced-woodworking-37/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/42a317b3820f2ac120ff6688859bda52-DOInIY.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260114T180000
DTEND;TZID=America/Vancouver:20260114T213000
DTSTAMP:20260403T121230
CREATED:20251209T035821Z
LAST-MODIFIED:20260201T184637Z
UID:10000981-1768413600-1768426200@events.makercube.ca
SUMMARY:CNC Router Table Orientation: Computer-Aided Manufacturing (CAM)
DESCRIPTION:If you’ve ever wanted to bring your designs to life\, join us for an immersive experience where you’ll delve into the essentials of Computer-Aided Manufacturing (CAM) and learn the skills needed to operate CNC machines effectively. This class is tailored for beginners and anyone interested in the endless possibilities of CNC machining. \nSign up now and unlock the potential to shape your creations with precision and accuracy! \nCome to our workshop if: \n\nYou’re eager to create precise and intricate parts with CNC technology.\nYou are looking for efficient and cost-effective solutions for production.\nYou enjoy customizing projects and exploring diverse design variations.\n\nDetails: \nDuration: 3 hours \nClass Capacity: 2 to 6 participants \nPrerequisites: None \nOptional: 2D Modelling with VCarve Pro or 3D Modelling with Fusion360 for Computer-aided design (CAD)\nPlease note\, we do not cover the process of CAD for creating\, designing\, or modifying files for the CNC in this class. If you are interested in learning about how to create your files\, register online for our VCarve class here. \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nIntroduction to Computer-Aided Manufacturing (CAM) set-up on VCarve Pro\nUnderstanding the basics of CNC machining\nWalkthrough for setting up the X35 CNC machine\n\nEquipment covered: \n\nOnefinity x35 CNC Machine (32″x32″ Bed)\n\nClass Goals: \nBy the end of the class\, participants will be familiar with the CNC process and be authorized to use the CNC independently as a member of Maker Cube at the discretion of the instructor. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/cnc-router-table-orientation-computer-aided-manufacturing-cam-22/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/6f9d4a1360e5ffb0c35d6f32f81dcc56-aCH98k.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260115T180000
DTEND;TZID=America/Vancouver:20260115T213000
DTSTAMP:20260403T121230
CREATED:20251231T222203Z
LAST-MODIFIED:20260103T222807Z
UID:10001001-1768500000-1768512600@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:30pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3.5 hours) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Fnd out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-56/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260117T103000
DTEND;TZID=America/Vancouver:20260117T140000
DTSTAMP:20260403T121230
CREATED:20251208T205237Z
LAST-MODIFIED:20260108T221617Z
UID:10000960-1768645800-1768658400@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-33/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260118T130000
DTEND;TZID=America/Vancouver:20260118T160000
DTSTAMP:20260403T121230
CREATED:20251221T201829Z
LAST-MODIFIED:20251221T201829Z
UID:10000983-1768741200-1768752000@events.makercube.ca
SUMMARY:MIG Welding Basics
DESCRIPTION:Take home your very own rocket stove in this introductory welding class!\n\n\nIn this introductory level MIG welding orientation\, you can get hands on experience with tools in the metal shop and learn the step by step process to create clean strong welds. You will carry out several operations to prep your material\, tack your pieces and lay a simple bead. This process aims to make you comfortable using the tools and gain welding experience. All of this combined will make your very own rocket stove! \nDuration: 3 hours \nTime: 1:00pm-4:00pm (please note the class may exceed 3 hours and go until 4:30) \nMaximum Participants: four (4) \n**Please note registration closes 24 hours prior to class** \nClass Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld\, tacking a weld\, creating T joints and the outside corners of welds\, and fitting a MIG weld into your project. The final project will be a rocket stove you can proudly take home and use. \nOur instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time. \nAfter the orientation\, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool. \nCome to our workshop if :\nYou want to increase your exposure to welding \nYou are not scared of a few sparks flying (literally) \nYou want to make your own iron man suit \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nSafety First\nRequired: \n\nWelding Mask (We strongly recommended that participants bring their own welding shield\, if a participant does not have a welding mask\, a sanitized welding mask will be provided)\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed Toed Shoes (preferably boots)\nDenim jeans\nLong sleeves\nLong hair tied back\nNo loose jewelry\nNo flammable materials (synthetic material such as polyester\,nylon etc.)\n\nRecommended: \n\nSteel toed boots\nA baseball cap\n\nPrerequisites: None \nTools Learned: \n\nAngle Grinders\nMIG welder\n\nAbout the Instructor : \n\nCorey Gerard – Welding Instructor at Maker Cube\nCorey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy\, precision measures and water jet cutting\, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting\, graphic design and brewing beer! \nIn his space time when he’s not tinkering at Maker Cube\, Corey enjoys; rock climbing in the summer\, snow boarding in the winter\, playing guitar and drinking an ice cold beer. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park ? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nFor more information about membership\, visit http://makercube.ca/how-to-become-a-maker
URL:https://events.makercube.ca/event/mig-welding-basics-39/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/ad4ecbc431519900c66338c9d1a7bf4b-Q2jM9A.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260120T180000
DTEND;TZID=America/Vancouver:20260120T210000
DTSTAMP:20260403T121230
CREATED:20251209T030523Z
LAST-MODIFIED:20251209T031008Z
UID:10000972-1768932000-1768942800@events.makercube.ca
SUMMARY:Laser Cutting and Engraving
DESCRIPTION:Learn how to customize your projects with the power of laser cutting! Laser cutting is used to add unique designs\, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic\, wood\, plywood\, MDF\, cardboard\, cork\, mylar and more! \nYou’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class\, you will have made your own integrated hinge box using MDF or acrylic! \nCome to our Laser workshop if: \n\nYou’ve always wanted to fire high powered lasers\nYou want to etch intricate designs into your projects\nYou like making finger pistols and going “Pew! Pew! Pew!”\nYou need to precisely cut shapes from sheet materials\n\nDetails: \nDuration: 3 hours \n6:00pm – 9:00pm on weekdays \nMaximum # of Participants: 4 \nProject: MDF or Acrylic laser cut box \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with vector programs like Illustrator or Inkscape is a plus! \n**Please note registration closes 24 hours prior to class** \nSkills learned: \n\nTool Safety procedures and routines\nSetting up your design files\nCreating clean cuts for different applications and materials\nOptimizing your time on the machine\n\nEquipment covered: \n\nLaser Cutter\nLaser support systems\n\nSafety First! \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\n\nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nClick here to learn more about membership at Maker Cube. \nAbout the Instructor: \n\nDoug Chan\, Director and Co-founder at Maker Cube\nDoug is an engineering graduate and serial entrepreneur\, with an aptitude for technology and rapid prototyping. Previously working in several start-ups\, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing\, metal fabrication to PCB fabrication\, he has explored a wide range of processes and techniques. As an enthusiastic learner\, Doug is passionate about passing on the skills he learns\, teaching others to take the leap and trying new things. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/laser-cutting-and-engraving-42/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/bbdaf0cd23a7ebe445699b01a8b1c1f4-XT838P.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260121T180000
DTEND;TZID=America/Vancouver:20260121T213000
DTSTAMP:20260403T121230
CREATED:20251231T211030Z
LAST-MODIFIED:20251231T211030Z
UID:10001000-1769018400-1769031000@events.makercube.ca
SUMMARY:Rough to Smooth - Advanced Woodworking
DESCRIPTION:Unlock the secrets of milling rough lumber for woodworking projects! Learn to identify wood grain and structure for optimal results and safety. \nFor Beginners: Don’t be intimidated. Our instructors have been in your shoes and will work hard to make sure you have a great experience. \nFor Experienced Makers:  Orientation classes are mandatory for all tool areas but there’s no reason why you can’t have a good time. Let us challenge you with a new technique or help you brush up on the basics. \nProject: Milling down rough lumber \nDifficulty: Intermediate \nPrerequisite: Intro to Wood Working Class You must take the introductory class prior to taking the Advanced class.  Click here to view upcoming Intro to Woodworking classes \nAge: 14+ \nDuration: 3.5 hours – you must arrive 15 minutes before the start time to participate. The class will start as scheduled\, please be respectful to the instructor and other participants by arriving on time. \n**Please note registration closes 24 hours prior to class** \nCome to our Woodworking workshop if:\n\nYou want to enhance your wood working projects\nYou like precision in your craftsmanship\nYou want to have access to more tools\n\nSkills Learned: How to mill rough lumber for use in woodworking projects. Identifying wood\, it’s grain\, and structure to ensure the best and safest results. \nDuring the class\, you will learn and demonstrate competency with each tool. Members will be authorized to use the tools independently as members of Maker Cube at the discretion of the instructor. Please note that based on attendance this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nRequired: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nAbout the Instructor: \n\nAdam Ali\, Director and Co-founder at Maker Cube\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/rough-to-smooth-advanced-woodworking-40/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/42a317b3820f2ac120ff6688859bda52-DOInIY.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260122T180000
DTEND;TZID=America/Vancouver:20260122T213000
DTSTAMP:20260403T121230
CREATED:20251209T013027Z
LAST-MODIFIED:20260103T222811Z
UID:10000966-1769104800-1769117400@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:30pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3.5 hours) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Fnd out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-53/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260124T103000
DTEND;TZID=America/Vancouver:20260124T140000
DTSTAMP:20260403T121230
CREATED:20251222T002632Z
LAST-MODIFIED:20260103T223122Z
UID:10000994-1769250600-1769263200@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-38/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260125T130000
DTEND;TZID=America/Vancouver:20260125T160000
DTSTAMP:20260403T121230
CREATED:20251221T214132Z
LAST-MODIFIED:20251221T214132Z
UID:10000985-1769346000-1769356800@events.makercube.ca
SUMMARY:Resin 3D Printing
DESCRIPTION:Get Started 3D Printing with Resin!\n\n\nWelcome to the fascinating world of 3D printing! If you’re looking to level up the quality of your 3D printing work\, then this is the perfect class for you. Our Resin 3D printing orientation will provide you with the fundamental knowledge you need to start working with a resin 3D printer. This class is designed for those who are interested in creating high detailed parts. You do not need any experience with FDM printing to get started with Resin 3d Printing. It is recommended if you’re new to 3D printing\,  to learn a little about FDM 3D printing first. You can learn about this process in our 3D Printing class.\n\n\nCome to our workshop if: \n\nYou are interested in learning about resin 3D printing processes\nYou want to print high-detail miniatures\nYou need to create complex prototypes\n\nDetails: \nDuration: 2 hours \nMaximum # of Participants: 4 \nRecommend class: What the Heck is it: 3D Printing \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nIntroduction to Resin 3D Printing\nWorkflow process and software orientation\nFinishing and post processing techniques\n\nEquipment covered: \n\nResin 3D Printer (Anycubic Mono X)\n3D printing Slicer: Lychee Slicer\n\nSafety First! \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/resin-3d-printing-7/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/png:https://events.makercube.ca/wp-content/uploads/sites/2/2023/06/Resin.png
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260127T180000
DTEND;TZID=America/Vancouver:20260127T213000
DTSTAMP:20260403T121230
CREATED:20251209T032355Z
LAST-MODIFIED:20260116T000206Z
UID:10000975-1769536800-1769549400@events.makercube.ca
SUMMARY:Rough to Smooth - Advanced Woodworking
DESCRIPTION:Unlock the secrets of milling rough lumber for woodworking projects! Learn to identify wood grain and structure for optimal results and safety. \nFor Beginners: Don’t be intimidated. Our instructors have been in your shoes and will work hard to make sure you have a great experience. \nFor Experienced Makers:  Orientation classes are mandatory for all tool areas but there’s no reason why you can’t have a good time. Let us challenge you with a new technique or help you brush up on the basics. \nProject: Milling down rough lumber \nDifficulty: Intermediate \nPrerequisite: Intro to Wood Working Class You must take the introductory class prior to taking the Advanced class.  Click here to view upcoming Intro to Woodworking classes \nAge: 14+ \nDuration: 3.5 hours – you must arrive 15 minutes before the start time to participate. The class will start as scheduled\, please be respectful to the instructor and other participants by arriving on time. \n**Please note registration closes 24 hours prior to class** \nCome to our Woodworking workshop if:\n\nYou want to enhance your wood working projects\nYou like precision in your craftsmanship\nYou want to have access to more tools\n\nSkills Learned: How to mill rough lumber for use in woodworking projects. Identifying wood\, it’s grain\, and structure to ensure the best and safest results. \nDuring the class\, you will learn and demonstrate competency with each tool. Members will be authorized to use the tools independently as members of Maker Cube at the discretion of the instructor. Please note that based on attendance this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nRequired: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nAbout the Instructor: \n\nAdam Ali\, Director and Co-founder at Maker Cube\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/rough-to-smooth-advanced-woodworking-39/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/42a317b3820f2ac120ff6688859bda52-DOInIY.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260128T180000
DTEND;TZID=America/Vancouver:20260128T200000
DTSTAMP:20260403T121230
CREATED:20251209T035336Z
LAST-MODIFIED:20251231T015630Z
UID:10000978-1769623200-1769630400@events.makercube.ca
SUMMARY:VCarve Pro 2D Drawing and CAD
DESCRIPTION:Enter a realm of infinite design possibilities and turn simple 2D designs into 3D carvings with VCarve Pro. We will walk you through the step-by-step design process and get you comfortable with the software. \nCome to our workshop if: \nYou want to design your very own unique product \nYou’ve got a doodle on a napkin but want to create a professional representation of your idea \nYou are interested in learning automated fabrication tools like CNC mills \nNot a member? If you love the workshop and want more classes or access to our facilities\, check out our monthly memberships. \nDetails: \nDuration: 2 hours \n6:00pm – 8:00pm on weekdays \nClass Capacity: 2-4 \nSkills Learned: Experience navigating\, designing\, and drawing with VCarve Pro. Importing Artwork and Generating G-Code for CNC machining. \nPrerequisites: None.  \nRecommended: Basic computer competency (how to use a computer\, browse the internet)\, CNC Router Table  \n**Please note registration closes 24 hours prior to class** \nClass Goals: \nParticipants in this class will learn how to think and design in 3D! With the help of our instructor\, participants will be introduced to V-Carve\, navigating a 3D workspace and utilizing a variety of modelling tools to design a projects for fabrication. Learning the underlying thought process of how a physical shape can be manufactured will be what participants use to drive their design process. By the end of the class\, everyone will have a basic understanding of how to use the software to design a project for fabrication and can use the resulting files in our other classes;laser cutting\, CNC milling\, 3D printing. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees are not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration the class will be canceled and participants registered will be rescheduled to an alternate class date. \nLearn more about Maker Cube and check out our other classes and events at www.makercube.ca
URL:https://events.makercube.ca/event/vcarve-pro-2d-drawing-and-cad-20/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2023/08/V-carve.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260129T180000
DTEND;TZID=America/Vancouver:20260129T213000
DTSTAMP:20260403T121230
CREATED:20260109T032209Z
LAST-MODIFIED:20260201T010403Z
UID:10001003-1769709600-1769722200@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:30pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3.5 hours) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Fnd out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-57/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260130T160000
DTEND;TZID=America/Vancouver:20260130T180000
DTSTAMP:20260403T121230
CREATED:20251208T015356Z
LAST-MODIFIED:20260118T234850Z
UID:10000958-1769788800-1769796000@events.makercube.ca
SUMMARY:Router Table Orientation
DESCRIPTION:Learn about Router Table Basics \nThis workshop will teach you the basics of the Router Table. Join us if you’re looking for more experience on woodshop tools! During this workshop you will learn about different bits\, profiling edge\, rabbets\, different tips and tricks for handling material\, and setting up your cut safely. \nDuration: 1.5-2 hours – please arrive on time to participate \n4:00pm – 6:00pm \nClass Capacity: 2-6 \nDifficulty: Beginner \nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou want to know the difference between a groove and dado.\nYou love challenging yourself by learning new skills.\n\nSkills Learned: \n\nDifferent bits and how they are used\nBasics to profiling with the Router Table\nSetting up the Router Table for Rabbets\, Dado\, and Grooves\n\nClass Goals: \nBy the end of the class\, participants will be comfortable to safely run the Router table to use it for a couple of simple setups. You will get hands-on practice time for profiling and dados. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/router-table-orientation-23/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/6eebbe0a0c87b2048d6332e5f03ca0b4-REpB0E.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260131T103000
DTEND;TZID=America/Vancouver:20260131T140000
DTSTAMP:20260403T121230
CREATED:20251208T205815Z
LAST-MODIFIED:20260201T010238Z
UID:10000962-1769855400-1769868000@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-34/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260201T130000
DTEND;TZID=America/Vancouver:20260201T160000
DTSTAMP:20260403T121230
CREATED:20251221T221001Z
LAST-MODIFIED:20260115T221358Z
UID:10000991-1769950800-1769961600@events.makercube.ca
SUMMARY:What the Heck is it: 3D Printing
DESCRIPTION:Welcome to the fascinating world of 3D printing! If you’ve ever wondered how to transform your design ideas into physical objects\, then this is the class for you. Our introduction to 3D printing will teach you the basics you need to know to get started on your journey toward bringing your designs to life. This class is perfect for beginners and anyone curious about the possibilities of 3D printing. Learn the in’s and out’s of operating our printers\, as well as tips and tricks to get the best quality prints as we orient you on our Anet A8 3D Printers; Nemo and Dory! \nSign up now and unleash your creativity in a whole new dimension! \nCome to our workshop if: \n\nYou want to create accessible simple solutions to everyday problems\nYou need faster production at an affordable cost\nYou like to customize your projects and explore variations in design\n\nDetails: \nDuration: 3 hours \nClass Capacity: 2 to 4 participants \nPrerequisites: None. \n**Please note registration closes 24 hours prior to class** \nTopics covered: \n\nIntroduction to how 3D Printers operate and the differences between printer types\nWorkflow process and software orientation\nFinishing and post processing techniques\n\nEquipment covered: \n\n3D Printers: Anet A8\n3D printing software: Ultimaker Cura\n\n \nSafety First! \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/what-the-heck-is-it-3d-printing-20/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/f2f38cf8e76d64d740af2af9b91bd166-ASQMsz.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260203T180000
DTEND;TZID=America/Vancouver:20260203T210000
DTSTAMP:20260403T121230
CREATED:20251209T031119Z
LAST-MODIFIED:20251209T031148Z
UID:10000973-1770141600-1770152400@events.makercube.ca
SUMMARY:Laser Cutting and Engraving
DESCRIPTION:Learn how to customize your projects with the power of laser cutting! Laser cutting is used to add unique designs\, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic\, wood\, plywood\, MDF\, cardboard\, cork\, mylar and more! \nYou’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class\, you will have made your own integrated hinge box using MDF or acrylic! \nCome to our Laser workshop if: \n\nYou’ve always wanted to fire high powered lasers\nYou want to etch intricate designs into your projects\nYou like making finger pistols and going “Pew! Pew! Pew!”\nYou need to precisely cut shapes from sheet materials\n\nDetails: \nDuration: 3 hours \n6:00pm – 9:00pm on weekdays \nMaximum # of Participants: 4 \nProject: MDF or Acrylic laser cut box \nPrerequisites: Basic computer literacy (how to use a computer\, browse the internet\, etc.) required. 2D CAD experience\, drawing with vector programs like Illustrator or Inkscape is a plus! \n**Please note registration closes 24 hours prior to class** \nSkills learned: \n\nTool Safety procedures and routines\nSetting up your design files\nCreating clean cuts for different applications and materials\nOptimizing your time on the machine\n\nEquipment covered: \n\nLaser Cutter\nLaser support systems\n\nSafety First! \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\n\nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nClick here to learn more about membership at Maker Cube. \nAbout the Instructor: \n\nDoug Chan\, Director and Co-founder at Maker Cube\nDoug is an engineering graduate and serial entrepreneur\, with an aptitude for technology and rapid prototyping. Previously working in several start-ups\, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing\, metal fabrication to PCB fabrication\, he has explored a wide range of processes and techniques. As an enthusiastic learner\, Doug is passionate about passing on the skills he learns\, teaching others to take the leap and trying new things. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/laser-cutting-and-engraving-43/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/bbdaf0cd23a7ebe445699b01a8b1c1f4-XT838P.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260205T180000
DTEND;TZID=America/Vancouver:20260205T213000
DTSTAMP:20260403T121230
CREATED:20260122T233946Z
LAST-MODIFIED:20260201T010151Z
UID:10001007-1770314400-1770327000@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. Besides learning tool safety\, you’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate. \n6:00pm – 9:30pm on weekdays (please note: depending on the participants\, the class may run late and exceed 3.5 hours) \nMaximum # of Participants: 6. \nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board. \nDifficulty: Beginner. \nAge: 14+. \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \n\nTicket Types:\nIntro to Wood – Regular Registration for the Woodworking class \nIntro to Wood + Wood Waker – Regular Registration for class + a 2.5 oz tin of Wood Waker Beeswax wood conditioner made in house at Maker Cube! Fnd out more information here: https://makercube.ca/ww/ or purchase it separately at https://makercube.square.site/ \nIntro to Wood + 1 Month of Membership – Regular Registration for class and add on a membership to get unlimited access to our woodshop space\, discounts on additional classes\, and 4 hours of time on our CNC machines. Check out <a />https://makercube.ca/how-to-become-a-maker/</a> for more details.\nTerms: Membership starts on the next 1st or the 15th of the month. \n\nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. After this class\, you will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note\, that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-58/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260206T170000
DTEND;TZID=America/Vancouver:20260206T190000
DTSTAMP:20260403T121230
CREATED:20251208T015839Z
LAST-MODIFIED:20260202T000129Z
UID:10000959-1770397200-1770404400@events.makercube.ca
SUMMARY:Router Table Orientation
DESCRIPTION:Learn about Router Table Basics \nThis workshop will teach you the basics of the Router Table. Join us if you’re looking for more experience on woodshop tools! During this workshop you will learn about different bits\, profiling edge\, rabbets\, different tips and tricks for handling material\, and setting up your cut safely. \nDuration: 1.5-2 hours – please arrive on time to participate \n4:00pm – 6:00pm \nClass Capacity: 2-6 \nDifficulty: Beginner \nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou want to know the difference between a groove and dado.\nYou love challenging yourself by learning new skills.\n\nSkills Learned: \n\nDifferent bits and how they are used\nBasics to profiling with the Router Table\nSetting up the Router Table for Rabbets\, Dado\, and Grooves\n\nClass Goals: \nBy the end of the class\, participants will be comfortable to safely run the Router table to use it for a couple of simple setups. You will get hands-on practice time for profiling and dados. \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/router-table-orientation-24/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/6eebbe0a0c87b2048d6332e5f03ca0b4-REpB0E.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260207T103000
DTEND;TZID=America/Vancouver:20260207T140000
DTSTAMP:20260403T121230
CREATED:20251209T021200Z
LAST-MODIFIED:20260201T010106Z
UID:10000969-1770460200-1770472800@events.makercube.ca
SUMMARY:Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
DESCRIPTION:Learn How to Create Your Own Beautiful Maple\, Purpleheart\, and Walnut Cutting Board! \nThis beginner-level workshop will teach you the basics of woodworking\, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work!  During this workshop you will learn how to work with hardwood\, glue joints\, use power tools safely\, and shape your project. \nDuration: 3.5 hours – please arrive 15 minutes before the start time to participate\nWeekend Session: 10:30AM – 2:00PM (please note: depending on the participants\, the class may run late and exceed 3.5 hours)\nMaximum # of Participants: 6\nProject: Eastern Maple\, Purpleheart\, & Black Walnut Cutting Board\nDifficulty: Beginner\nAge: 14+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou’re looking for a different way to unwind after work\nYou want to be a part of a community of creatives\nYou love challenging yourself by learning new skills\n\nSkills Learned: \nYou will learn how to work with hardwood\, glue up joints\, using power tools safely\, shape and sand\, and then apply a food safe finish. \nClass Goals: \nBy the end of the class\, participants will be comfortable with the operation of various power tools including a drill press\, band saw\, miter saw\, belt and spindle sander\, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class\, everyone will learn about each tool\, and get the opportunity to demonstrate their competency on each tool\, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance\, this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nGeneral attire requirements: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nMask (if you have sensitivities to sawdust/airborne dust)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-cutting-board-introduction-to-woodworking-weekend-35/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/03/2024introToWoodworking.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260208T130000
DTEND;TZID=America/Vancouver:20260208T160000
DTSTAMP:20260403T121230
CREATED:20251221T215016Z
LAST-MODIFIED:20251221T215016Z
UID:10000987-1770555600-1770566400@events.makercube.ca
SUMMARY:MIG Welding Basics
DESCRIPTION:Take home your very own rocket stove in this introductory welding class!\n\n\nIn this introductory level MIG welding orientation\, you can get hands on experience with tools in the metal shop and learn the step by step process to create clean strong welds. You will carry out several operations to prep your material\, tack your pieces and lay a simple bead. This process aims to make you comfortable using the tools and gain welding experience. All of this combined will make your very own rocket stove! \nDuration: 3 hours \nTime: 1:00pm-4:00pm (please note the class may exceed 3 hours and go until 4:30) \nMaximum Participants: four (4) \n**Please note registration closes 24 hours prior to class** \nClass Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld\, tacking a weld\, creating T joints and the outside corners of welds\, and fitting a MIG weld into your project. The final project will be a rocket stove you can proudly take home and use. \nOur instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time. \nAfter the orientation\, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool. \nCome to our workshop if :\nYou want to increase your exposure to welding \nYou are not scared of a few sparks flying (literally) \nYou want to make your own iron man suit \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube. \nSafety First\nRequired: \n\nWelding Mask (We strongly recommended that participants bring their own welding shield\, if a participant does not have a welding mask\, a sanitized welding mask will be provided)\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed Toed Shoes (preferably boots)\nDenim jeans\nLong sleeves\nLong hair tied back\nNo loose jewelry\nNo flammable materials (synthetic material such as polyester\,nylon etc.)\n\nRecommended: \n\nSteel toed boots\nA baseball cap\n\nPrerequisites: None \nTools Learned: \n\nAngle Grinders\nMIG welder\n\nAbout the Instructor : \n\nCorey Gerard – Welding Instructor at Maker Cube\nCorey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy\, precision measures and water jet cutting\, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting\, graphic design and brewing beer! \nIn his space time when he’s not tinkering at Maker Cube\, Corey enjoys; rock climbing in the summer\, snow boarding in the winter\, playing guitar and drinking an ice cold beer. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park ? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nFor more information about membership\, visit http://makercube.ca/how-to-become-a-maker
URL:https://events.makercube.ca/event/mig-welding-basics-41/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/ad4ecbc431519900c66338c9d1a7bf4b-Q2jM9A.tmp_.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260209T180000
DTEND;TZID=America/Vancouver:20260209T200000
DTSTAMP:20260403T121230
CREATED:20251011T230944Z
LAST-MODIFIED:20260118T212755Z
UID:10000939-1770660000-1770667200@events.makercube.ca
SUMMARY:Make Your Own Sushi Platter Set: Handbuilding Pottery for Adults
DESCRIPTION:Come join us in out pottery handbuilding class\, and play with clay to make your Sushi Platter Set! \nPottery is an exceptional art form that transforms clay into functional dinnerware\, home decorations\, and sculptures. In this beginner-friendly class\, you will learn how to handbuild your own pieces using slump molds\, carving\, shaping\, and glazing. You will make your own sushi platter\, sauce dish\, and chopstick rest to take home! \nDuration: 2 hour Classes – Check in up to 15 minutes before the start time to participate\nTime: 6:00 pm – 8:00pm\nDates: 2 Mondays\nMaximum # of Participants: 4\nProject: Sushi Platter Set made up of a Sushi Platter\, Sauce Dish\, and Chopstick Rest\nDifficulty: Beginner\nAge: 18+ \n**Please note registration closes 24 hours prior to class** \nCome to our workshop if: \n\nYou enjoy making messes while creating\nYou want to create unique pieces for your home\nYou want to get started with pottery\n\nSkills Learned: Handbuilding\, Shaping\, Working with Bisqueware\, Underglaze Painting\, Dip Glazing \nClass Goals: To familiarize yourself with the steps of pottery and enjoy yourself in the process! \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nAttire \nRequired: \n\nClosed-toe shoes\nLong hair tied back\n\nRecommended \n\nWear old clothes that you aren’t afraid to get a little muddy!\nApron (highly recommended)\n\nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 18. Anybody above the age of 18 or older is welcomed to join! \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be cancelled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/make-your-own-sushi-platter-set-handbuilding-pottery-for-adults-3/
LOCATION:Maker Cube – Langley Makerspace\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2023/05/PXL_20230612_230345067-2-scaled-e1700534813235.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.108599;-122.652262
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260210T180000
DTEND;TZID=America/Vancouver:20260210T213000
DTSTAMP:20260403T121230
CREATED:20251228T224242Z
LAST-MODIFIED:20260126T220413Z
UID:10000999-1770746400-1770759000@events.makercube.ca
SUMMARY:Rough to Smooth - Advanced Woodworking
DESCRIPTION:Unlock the secrets of milling rough lumber for woodworking projects! Learn to identify wood grain and structure for optimal results and safety. \nFor Beginners: Don’t be intimidated. Our instructors have been in your shoes and will work hard to make sure you have a great experience. \nFor Experienced Makers:  Orientation classes are mandatory for all tool areas but there’s no reason why you can’t have a good time. Let us challenge you with a new technique or help you brush up on the basics. \nProject: Milling down rough lumber \nDifficulty: Intermediate \nPrerequisite: Intro to Wood Working Class You must take the introductory class prior to taking the Advanced class.  Click here to view upcoming Intro to Woodworking classes \nAge: 14+ \nDuration: 3.5 hours – you must arrive 15 minutes before the start time to participate. The class will start as scheduled\, please be respectful to the instructor and other participants by arriving on time. \n**Please note registration closes 24 hours prior to class** \nCome to our Woodworking workshop if:\n\nYou want to enhance your wood working projects\nYou like precision in your craftsmanship\nYou want to have access to more tools\n\nSkills Learned: How to mill rough lumber for use in woodworking projects. Identifying wood\, it’s grain\, and structure to ensure the best and safest results. \nDuring the class\, you will learn and demonstrate competency with each tool. Members will be authorized to use the tools independently as members of Maker Cube at the discretion of the instructor. Please note that based on attendance this tool training may not provide significant practice with each tool\, nor discuss any intermediate or advanced techniques.  \nNot a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. \nClick here to learn more about membership at Maker Cube. \nSafety First \nRequired: \n\nSafety Glasses (participants must bring their own eye protection\, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)\nClosed-toe shoes\nLong hair tied back\nNo loose jewelry or cords\nNo long sleeved shirts or loose clothing\n\nAbout the Instructor: \n\nAdam Ali\, Director and Co-founder at Maker Cube\nAdam is the true definition of a Maker with experience ranging from upholstery to machining exhaust fittings for light aircraft. He has been tinkering for as long as he can remember and fondly recalls spending summers with his dad and brothers building tree forts\, soapbox racers\, and bike ramps. Their favorite project? An epic two-floor pallet wood treehouse complete with lights\, windows and (of course) a secret escape hatch. He followed his passion through school taking as many courses as he could in woodworking\, metal fabrication\, music production\, and media arts. For the past 10 years\, Adam has built skillsets in many disciplines with his favorite being custom car audio fabricator. Adam’s approach to design and making often comes from a need to solve problems that don’t have commercially available solutions. \nFAQs \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is additional street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration\, the class will be canceled and participants registered will be rescheduled to an alternate class date. \nDiscover more to make at Maker Cube here
URL:https://events.makercube.ca/event/rough-to-smooth-advanced-woodworking-42/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2024/02/42a317b3820f2ac120ff6688859bda52-DOInIY.tmp_.jpg
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Vancouver:20260211T180000
DTEND;TZID=America/Vancouver:20260211T200000
DTSTAMP:20260403T121230
CREATED:20251209T035442Z
LAST-MODIFIED:20251209T035442Z
UID:10000979-1770832800-1770840000@events.makercube.ca
SUMMARY:VCarve Pro 2D Drawing and CAD
DESCRIPTION:Enter a realm of infinite design possibilities and turn simple 2D designs into 3D carvings with VCarve Pro. We will walk you through the step-by-step design process and get you comfortable with the software. \nCome to our workshop if: \nYou want to design your very own unique product \nYou’ve got a doodle on a napkin but want to create a professional representation of your idea \nYou are interested in learning automated fabrication tools like CNC mills \nNot a member? If you love the workshop and want more classes or access to our facilities\, check out our monthly memberships. \nDetails: \nDuration: 2 hours \n6:00pm – 8:00pm on weekdays \nClass Capacity: 2-4 \nSkills Learned: Experience navigating\, designing\, and drawing with VCarve Pro. Importing Artwork and Generating G-Code for CNC machining. \nPrerequisites: None.  \nRecommended: Basic computer competency (how to use a computer\, browse the internet)\, CNC Router Table  \n**Please note registration closes 24 hours prior to class** \nClass Goals: \nParticipants in this class will learn how to think and design in 3D! With the help of our instructor\, participants will be introduced to V-Carve\, navigating a 3D workspace and utilizing a variety of modelling tools to design a projects for fabrication. Learning the underlying thought process of how a physical shape can be manufactured will be what participants use to drive their design process. By the end of the class\, everyone will have a basic understanding of how to use the software to design a project for fabrication and can use the resulting files in our other classes;laser cutting\, CNC milling\, 3D printing. \nFAQS \nWhat is the age limit for the class? \nThe minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class. \nWhere can I park? \nMaker Cube’s parking lot has ample space available. Should the lot reach capacity\, there is street parking along 206A St. \nHow do I cancel or reschedule a class? \nRefunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation\, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class. \nProcessing fees are not refunded. \nPlease arrive 15 minutes before the class for sign-in and to ensure it starts on time\, those arriving more than 5 minutes late will not be able to attend. In the event of low registration the class will be canceled and participants registered will be rescheduled to an alternate class date. \nLearn more about Maker Cube and check out our other classes and events at www.makercube.ca
URL:https://events.makercube.ca/event/vcarve-pro-2d-drawing-and-cad-21/
LOCATION:Maker Cube\, #104B 5947 206A Street\, Langley\, V3A8M1\, Canada
CATEGORIES:Orientation
ATTACH;FMTTYPE=image/jpeg:https://events.makercube.ca/wp-content/uploads/sites/2/2023/08/V-carve.jpg
ORGANIZER;CN="Maker Cube INC.":MAILTO:info@makercube.ca
GEO:49.1086403;-122.6526798
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Maker Cube #104B 5947 206A Street Langley V3A8M1 Canada;X-APPLE-RADIUS=500;X-TITLE=#104B 5947 206A Street:geo:-122.6526798,49.1086403
END:VEVENT
END:VCALENDAR