Make Your Own Cutting Board - Introduction to Woodworking (Weekend)
2024-04-13 10:30 - 14:00 (America/Vancouver) | Maker Cube, #104B 5947 206A Street, Langley, V3A8M1, Canada
Learn How to Create Your Own Beautiful Maple, Purpleheart, and Walnut Cutting Board!
This beginner-level workshop will teach you the basics of woodworking, including safe handling of common tools. You’ll leave with an 8 x 12 inch cutting board that you made yourself. Join us if you’re looking for a fun and creative way to unwind after work! During this workshop you will learn how to work with hardwood, glue joints, use power tools safely, and shape your project.
Duration: 3.5 hours – please arrive 15 minutes before the start time to participate
Weekend Session: 10:30AM – 1:30PM (please note: depending on the participants, the class may run late and exceed 3.5 hours)
Maximum # of Participants: 6
Project: Eastern Maple, Purpleheart, & Black Walnut Cutting Board
Difficulty: Beginner
Age: 14+
**Please note registration closes 24 hours prior to class**
Come to our workshop if:

You’re looking for a different way to unwind after work
You want to be a part of a community of creatives
You love challenging yourself by learning new skills

Skills Learned:
You will learn how to work with hardwood, glue up joints, using power tools safely, shape and sand, and then apply a food safe finish.
Class Goals:
By the end of the class, participants will be comfortable with the operation of various power tools including a drill press, band saw, miter saw, belt and spindle sander, and random orbit sander. All participants will be introduced to general woodshop safety and Maker Cube culture. During the class, everyone will learn about each tool, and get the opportunity to demonstrate their competency on each tool, by making their own cutting board. You will be authorized to use the tools independently as a member of Maker Cube at the discretion of the instructor. Please note that based on attendance, this tool training may not provide significant practice with each tool, nor discuss any intermediate or advanced techniques.
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop.
Click here to learn more about membership at Maker Cube.
Safety First
General attire requirements:

Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)
Mask (if you have sensitivities to sawdust/airborne dust)
Closed-toe shoes
Long hair tied back
No loose jewelry or cords
No long sleeved shirts or loose clothing

What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Laser Cutting and Engraving
2024-04-09 18:00 - 21:00
Learn how to customize your projects with the power of lasers! Laser cutting is a wonderful way to add unique designs, quotes or logos to your work and can cut or etch a wide variety of materials including: acrylic, wood, plywood, MDF, cardboard, cork, mylar and more!
You’ll be walked through the design process and learn how to create your very own files then taken on a step by step orientation of how to operate our laser cutter! Completing this class, you will have made your own integrated hinge box using MDF or acrylic!
Come to our Laser workshop if:

You’ve always wanted to fire high powered lasers
You want to etch intricate designs into your projects
You like making finger pistols and going “Pew! Pew! Pew!”
You need to precisely cut shapes from sheet materials

Details:
Duration: 3 hours
6:00pm – 9:00pm on weekdays
Maximum # of Participants: 4
Project: MDF or Acrylic laser cut box
Prerequisites: Basic computer literacy (how to use a computer, browse the internet, etc.) required. 2D CAD experience, drawing with vector programs like Illustrator or Inkscape is a plus!
**Please note registration closes 24 hours prior to class**
Skills learned:

Tool Safety procedures and routines
Setting up your design files
Creating clean cuts for different applications and materials
Optimizing your time on the machine

Equipment covered:

Laser Cutter
Laser support systems

Safety First!

Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)

Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube.
Click here to learn more about membership at Maker Cube.
About the Instructor:
Doug Chan, Director and Co-founder at Maker Cube
Doug is an engineering graduate and serial entrepreneur, with an aptitude for technology and rapid prototyping. Previously working in several start-ups, he has experience in many fields of fabrication both traditional and modern. From molding and casting to 3D printing, metal fabrication to PCB fabrication, he has explored a wide range of processes and techniques. As an enthusiastic learner, Doug is passionate about passing on the skills he learns, teaching others to take the leap and trying new things.
FAQs
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is additional street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time. Those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Handbuilding Pottery for Adults
2024-04-08 16:00 - 18:00
Come play with clay and make your own bowls and plates!
Pottery is an exceptional art form that transforms clay into functional dinnerware, home decorations, and sculptures. In this beginner-friendly class, you will learn how to handbuild your own pieces using slump molds, carving, shaping, and glazing. You will make your own bowl or plate to take home!
Duration: 2 hour Classes – Please arrive 15 minutes before the start time to participate
Time: 4:00 pm – 6:00pm
Dates: 2 Mondays
Maximum # of Participants: 4
Project: Ceramic Bowls or Plates
Difficulty: Beginner
Age: 18+
**Please note registration closes 24 hours prior to class**
Come to our workshop if:

You enjoy making messes while creating
You want to create unique pieces for your home
You want to get started with pottery

Skills Learned: Handbuilding, Shaping, Working with Bisqueware, Underglaze Painting, Dip Glazing
Class Goals: To familiarize yourself with the steps of pottery and enjoy yourself in the process!
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop.
Click here to learn more about membership at Maker Cube.
Attire
Required:

Closed-toe shoes
Long hair tied back

Recommended

Wear old clothes that you aren’t afraid to get a little muddy!
Apron (highly recommended)

FAQS
What is the age limit for the class?
The minimum age for participants is 18. Anybody above the age of 18 or older is welcomed to join!
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be cancelled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here

Vinyl Plotting: Making Decals and Stencils
2024-04-07 14:00 - 16:00
DIY Vinyl Decal
Want to make your own vinyl window decor, signage, or customize a mug?
In our hands-on Vinyl Plotting Workshop, we will go over the basics of vinyl plotting and techniques for vinyl application! You will get to make and take home custom, ready-to-apply decals at the end of this class.
Vinyl stickers are weather-resistant. It can last up to 3 years for indoor use and up to 1 year for outdoor application.
**Please note registration closes 24 hours prior to class**
Duration: 1.5 hours – please arrive early, the workshop will start promptly
Class Capacity: 2-4
Difficulty: Beginner
Age: 8+ Minors must be accompanied by a parent or guardian
Class Goals:
You will learn how to create designs, how to optimize your file for vinyl plotting, how to weed (remove excess vinyl) to reveal your design, and how to apply vinyl to flat surfaces.
Not a member? If you love the vinyl workshop and want more classes or access to our facilities, check out our monthly memberships. Click here to learn more about membership at Maker Cube.
General attire:

Closed toed shoes
Long hair tied back

What is the age limit for the class?
The minimum age for participants is 8. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
Discover more to make at Maker Cube here: www.makercube.ca

MIG Welding Basics
2024-04-07 13:00 - 16:00
In this introductory level MIG welding orientation, you can get hands on experience with tools in the metal shop and learn the step by step process to create clean strong welds. You will carry out several operations to prep your material, tack your pieces and lay a simple bead. This process aims to make you comfortable using the tools and gain welding experience.
Duration: 3 hours
Time: 1:00pm-4:00pm (please note the class may exceed 3 hours and go until 4:30)
Maximum Participants: four (4)
**Please note registration closes 24 hours prior to class**
Class Goals: You will learn the proper safety procedures and the routine set up to weld confidently. By the end of the class you will have gained experience in: prepping and cleaning stock for a weld, tacking a weld, creating T joints and the outside corners of welds, and fitting a MIG weld into your project. The final project will be a clean and polished finished practice piece you can proudly take home.
Our instructor will explain the mechanics of each tool and carry out an orientation to demonstrate their function. You will be authorized to use the tools independently and receive ample practice time.
After the orientation, members at Maker Cube will be able to use the tools covered in the orientation on a regular basis after successful completion of the testing portion each tool.
Come to our workshop if :
You want to increase your exposure to welding
You are not scared of a few sparks flying (literally)
You want to make your own iron man suit
Not a member? If you love the class and want more shop time we offer great incentives for new members on the day of the workshop. Click here to learn more about membership at Maker Cube.
Safety First
Required:

Welding Mask (We strongly recommended that participants bring their own welding shield, if a participant does not have a welding mask, a sanitized welding mask will be provided)
Safety Glasses (participants must bring their own eye protection, if they do not have eye protection a pair of safety glasses can be purchased at Maker Cube’s front counter)
Closed Toed Shoes (preferably boots)
Denim jeans
Long sleeves
Long hair tied back
No loose jewelry
No flammable materials (synthetic material such as polyester,nylon etc.)

Recommended:

Steel toed boots
A baseball cap

Prerequisites: None
Tools Learned:

Angle Grinders
MIG welder

About the Instructor :
Corey Gerard – Welding Instructor at Maker Cube
Corey’s interest in fabrication began in 2012 when he started working for a water jet company. After a few years of building a strong skill set in metallurgy, precision measures and water jet cutting, Corey began a new career path working for foundation mechanical. At his new career he has expanded his welding skills while learning how to build brewery equipment and gained experience in laser cutting, graphic design and brewing beer!
In his space time when he’s not tinkering at Maker Cube, Corey enjoys; rock climbing in the summer, snow boarding in the winter, playing guitar and drinking an ice cold beer.
FAQS
What is the age limit for the class?
The minimum age for participants is 14. Participants under the age of 18 must have a parent or guardian provide supervision during the class.
Where can I park ?
Maker Cube’s parking lot has ample space available. Should the lot reach capacity, there is street parking along 206A St.
How do I cancel or reschedule a class?
Refunds or credit for future classes will only be provided if we are notified by email to info@makercube.ca at least 24 hours in advance of the class. No refunds will be provided for late cancellation, and a re-booking fee of 50% of the cost of the class will be applied to reschedule a class.
Processing fees not refunded.
Please arrive 15 minutes before the class for sign-in and to ensure it starts on time, those arriving more than 5 minutes late will not be able to attend. In the event of low registration, the class will be canceled and participants registered will be rescheduled to an alternate class date.
